Download Print this page

Advertisement

Cisco TelePresence SX10 Quick Set
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Software version TC7.2
AUGUST 2014

Administrator guide

for Cisco TelePresence SX10 Quick Set
D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
1

Advertisement

Chapters

   Summary of Contents for Cisco TelePresence SX10

  • Page 1: Administrator Guide

    Web interface System settings Setting passwords Appendices Software version TC7.2 AUGUST 2014 Administrator guide for Cisco TelePresence SX10 Quick Set D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 2: Table Of Contents

    Setting passwords .............. 104 Changing the persistency mode ..........41 Setting the system password ..........105 Deleting trust lists (CUCM only) ..........42 D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 3

    Supported RFCs ..............114 User documentation on the Cisco web site ......115 Intellectual property rights .............116 Cisco contacts ..............116 D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 4

    Cisco TelePresence SX10 Quick Set Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices Chapter 1 Introduction D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 5: User Documentation

    Cisco TelePresence SX10 Quick Set endpoints/telepresence-quick-set-series/tsd-products- running support-series-home.html • Administering TC Endpoints on CUCM: Tasks to perform to start using the product with the Cisco Unified Communications Manager (CUCM) • Administrator guide (this guide): Information required to administer your product •...

  • Page 6: What's New In This Version

    SystemUnit Name • Video OSD TodaysBookings • Standby StandbyAction • Audio DefaultVolume • Conference 1 MaxTotalReceiveCallRate • Conference 1 MaxTotalTransmitCallRate D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 7

    Peripherals Pairing CiscoTouchPanels RemotePairing PortugueseBrazilian/Russian/Spanish/SpanishLatin/ Peripherals Profile TouchPanels Swedish/Turkish/ Arabic/Hebrew> Time OlsonZone Video Input Connector[n] InputSourceType OLD: <other/camera/PC/DVD/document_camera> NEW: <other/camera/PC/DVD/document_camera/ whiteboard> D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 8: Sx10 Quick Set At A Glance

    System settings Setting passwords Appendices SX10 Quick Set at a glance The Cisco TelePresence SX10 Quick Set is an all-in-one unit Features and benefits designed to video-enable small collaboration spaces. • Optimal definition up to 1080p30 with content sharing at...

  • Page 9: The Screen And The Remote Control

    Use the Cancel key to exit a menu (and return to the Home screen), undoing any changes. Use the Back key to go just one step back. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 10: Web Interface

    Cisco TelePresence SX10 Quick Set Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Chapter 2 Web interface D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 11: Accessing The Web Interface

    Signing out Hover the mouse over the user name and choose Sign out from the drop-down list. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 12: Changing The System Password

    Change password for the change to take effect. If the password currently is not set, leave Current password field blank. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 13: The Interactive Menu

    Startup Scripts Security You can read more about user administration, user roles and access rights in the ► User administration section. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 14: System Information

    The system information shown in the illustration serve as an example. Your system may be different. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 15: Placing A Call

    Search and Dial field. Then click the Call button that appears next to the URI or number. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 16: Sharing Content

    1. Choose a Presentation source from the drop-down list. 2. Click Start Presentation. Stop content sharing: Click the Stop Presentation button that is present while sharing. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 17: Controlling And Monitoring A Call

    Click the button again to hide the information. Call details If necessary, scroll your browser to see the call details. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 18: Controlling Your Camera

    Camera preset Click the preset’s name to move the camera to it’s default position. Click to close the window. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 19: Local Layout Control

    The set of layouts to choose from depends on the system configurations. You may change the layout while in a call. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 20: Capturing Snapshots

    (main source and presentation source) approximately every two seconds. Snapshots from the video system D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 21: Controlling The Far End Camera

    3. Use the left and right arrows to pan the camera; the up and down arrows to tilt it; and to zoom in and out. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 22: Accessing Call Information

    Check this box, if you do not want to receive such notifications. Opening the Call Control page Click Open Call Control to go straight to the Call Control page. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 23: System Configuration

    The configuration shown in the illustration serve as an example. Your system may be configured differently. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 24: Changing System Settings

    The configuration shown in the illustration serve as an example. Your system may be configured differently. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 25: System Status

    The status shown in the illustration serve as an example. The status of your system may be different. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 26: Managing The Local Contacts

    Note that only the first contact method appears in the Favorites list on the Touch controller. All contact methods are available when using the remote control. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 27: Local Contacts Folders

    Delete to remove the folder and all its contacts and sub-folders. Confirm your choice in the dialog that pops up. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 28: Choosing A Wallpaper

    Supported file formats: BMP, GIF, JPEG, PNG Maximum file size: 2 MByte The custom wallpaper will be automatically activated once uploaded. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 29: Choosing A Ringtone

    Use the stop button (   ) to end the playback. Set the ringtone volume Use the slide bar to adjust the ringtone volume. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 30: Peripherals Overview

    Touch controllers The peripherals shown in the illustration serve as examples. Your system may have different peripherals and video input/output configurations. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 31: User Administration

    An administrator user account with full access rights, like the default admin user, must possess all the three roles. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 32

    Back button to leave without making any changes. The password is used with the web interface and command line interface. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 33

    Back button to leave without making any changes. The password is used with the web interface and command line interface. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 34

    1. Click the name of an existing user to open the Editing user window. 2. Click Delete <user name>... and confirm when prompted. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 35: Adding A Sign In Banner

    Enter the message that you want to present to the user when signing in, and click Save to activate the banner. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 36: Managing The Video System's Certificates

    The certificates and certificate issuers shown in the illustration serve as examples. Your system may have other certificate(s). D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 37: Managing The List Of Trusted Certificate Authorities

    CA certificate list (file format: .PEM). The certificate and certificate issuers shown in the illustration serve as examples. Your system will have other certificate(s). D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 38

    If the audit server cannot be authenticated, the logs will not be sent. Always upload the list of trusted certificate authorities before enabling secure audit logging. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 39: Managing Pre-installed Certificates For Edge Provisioning

    The certificate and certificate issuers shown in the illustration serve as examples. Your system will have other certificate(s). D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 40: Setting Strong Security Mode

    Disable strong security mode..Confirm your choice in the dialog box that appears The system will restart automatically. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 41: Changing The Persistency Mode

    You can also see the status by checking Security > Persistency on the Configuration > System Status page. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 42: Deleting Trust Lists (cucm Only)

    For more information about CUCM and trust lists, read the Administering TC Endpoints on CUCM guide available on the Cisco web site. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 43: Troubleshooting

    The messages shown in the illustration serve as examples. Your system may show other information. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 44: Downloading Log Files

    The log files shown in the illustration serve as examples. Your system may have other files. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 45: Starting Extended Logging

    As default, the network traffic is not captured. Use the drop down menu if you want to include a full or partial capture of the network traffic. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 46: Capturing Screenshots

    30 seconds before the screenshot is ready. All captured snapshots are included in the list above the buttons. Click the screenshot ID to display the image. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 47: Upgrading The System Software

    Click Browse... and find the downloaded .pkg file that contains the new software. If you do not have the required key(s), contact your Cisco ii. Check the Upgrade automatically after upload check representative to obtain them.

  • Page 48: Backup And Restore

    Click Restore to reconfigure the system as defined in the file. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 49: Reverting To The Previously Used Software Version

    Reverting to the previously used software version should only be done by a system administrator or in contact with Cisco technical support. We strongly recommend that you backup your system’s log files and configuration before you swap to the other software image.

  • Page 50: Factory Reset

    Read about software swapping in the ► Reverting to the previously used software version section. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 51: Remote Support User

    4. Cisco TAC will generate a password. The remote support user is valid for seven days, or until it is deleted. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 52: Restarting The System

    The system cannot be turned on again remotely; you must press its power button physically to turn it on. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 53: System Settings

    Cisco TelePresence SX10 Quick Set Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Chapter 3 System settings D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 54: Overview Of The System Settings

    Network [1..1] QoS Diffserv Video ........... 68 the screen and press OK on the remote control. Then open the Weight ..................63 Settings menu. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 55

    SIP Profile [1..1] Line ..............88 UserInterface Wallpaper ............94 Provisioning ExternalManager Address ........80 SIP Profile [1..1] Mailbox ............88 D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 56

    Video Input Connector [2..3] Quality ........97 Video Output Connector [1] CEC Mode .........101 Video Input Connector [2] RGBQuantizationRange ....98 Video Output Connector [1] OverscanLevel......101 D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 57: Audio Settings

    -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched off. Audio DefaultVolume: 50 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 58: Cameras Settings

    Requires user role: ADMIN Value space: <1..31> Range: Select a value from 1 to 31. Cameras Camera 1 Brightness Level: 20 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 59

    Requires user role: ADMIN Value space: <1..16> Range: Select a value from 1 to 16. Cameras Camera 1 Whitebalance Level: 1 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 60: Conference Settings

    The active AutoAnswer Mute setting if you want your microphone to be muted when the call is answered. control feature is enabled by default, provided that it is supported by the infrastructure (Cisco Requires user role: ADMIN Unified Communications Manager (CUCM) version 9.1.2 or newer, Cisco TelePresence Video...

  • Page 61

    Range: Select a value between 64 and 3072 kbps. as normal. Conference 1 DefaultCall Rate: 1920 Example: Conference 1 FarEndControl Mode: On Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 62

    Requires user role: ADMIN Conference 1 MaxTotalTransmitCallRate: 3072 Example: Value space: <1..10> Range: 1 to 10. Conference 1 VideoBandwidth MainChannel Weight: 5 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 63

    Conference 1 Presentation OnPlacedOnHold: NoAction Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 64: Facilityservice Settings

    Not applicable in this version. FacilityService Service [1..5] Number Not applicable in this version. FacilityService Service [1..5] CallType Not applicable in this version. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 65: Logging Settings

    Contents Introduction Web interface System settings System settings Setting passwords Appendices Logging settings Logging Mode Not applicable in this version. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 66: Network Settings

    DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use. Network 1 IPv6 Assignment: Autoconf Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 67

    Network [1..1] DHCP RequestTFTPServerAddress Enter the static IPv6 network address for the system. This setting is only applicable when the This setting is used only for video systems that are registered to a Cisco Unified Network IPv6 Assignment is set to Static.

  • Page 68

    0 (best effort). Network 1 QoS Diffserv Audio: 0 Example: Network 1 QoS Diffserv Data: 0 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 69

    Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort). Network 1 QoS Diffserv ICMPv6: 0 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 70

    Requires user role: ADMIN Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Network 1 IEEE8021X Identity: "" Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 71

    Value space: <S: 0, 255> Set the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Security. Format: String with a maximum of 255 characters, comma separated IP addresses or IP range.

  • Page 72

    Requires user role: ADMIN Value space: <Auto/Manual/Off> Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.

  • Page 73: Networkservices Settings

    Off: The Telnet protocol is disabled. This is the factory setting. On: The Telnet protocol is enabled. NetworkServices Telnet Mode: Off Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 74

    NetworkServices HTTPS VerifyServerCertificate: Off Example: NetworkServices Medianet Metadata Switch On or Off the capability to tag media flows with metadata related to the Cisco Medianet NetworkServices HTTPS VerifyClientCertificate deployment. When the video system connects to a HTTPS client (like a web browser), the client can be Requires user role: ADMIN asked to present a certificate to the video system to identify itself.

  • Page 75

    SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same Requires user role: ADMIN SNMP Community is configured there too. NOTE: The SNMP Community password is case sensitive.

  • Page 76: Networkservices Ssh Mode

    NetworkServices SSH AllowPublicKey: On Example: NetworkServices CTMS Mode This setting determines whether or not to allow multiparty conferences controlled by a Cisco TelePresence Multipoint Switch (CTMS). Video systems are able to initiate or join non-encrypted multiparty conferences controlled by CTMS version 1.8 or later. Encrypted conferences are supported as from software versions CTMS 1.9.1.

  • Page 77: Peripherals Settings

    Peripherals settings Peripherals Pairing CiscoTouchPanels RemotePairing In order to use Cisco Touch 10 (touch controller) as user interface for the video system, Touch 10 must be paired to the video system via the network (LAN). This is referred to as remote pairing.

  • Page 78: Phonebook Settings

    VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication Server. TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite server. Callway: Select Callway if the phonebook is to be provided by the WebEx TelePresence subscription service (formerly called CallWay).

  • Page 79: Provisioning Settings

    Select the HTTP method to be used for the provisioning. Auto: The provisioning server will automatically be selected by the video system. Requires user role: ADMIN TMS: The video system will be configured using TMS (Cisco TelePresence Management System). Value space: <GET/POST>...

  • Page 80: Provisioning Externalmanager Protocol

    Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager (CUCM) and an alternate CUCM is available for redundancy. Enter the address of the alternate Provisioning ExternalManager Domain: "any.domain.com"...

  • Page 81: Rtp Settings

    Requires user role: ADMIN Value space: <1120..65535> Range: Select a value from 1120 to 65535. RTP Ports Range Stop: 2486 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 82: Security Settings

    Manual: Will use the port value defined in the Security Audit Server Port setting. Example: Security Audit Server PortAssignment: Auto Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 83: Security Session Showlastlogon

    Range: Select a value between 1 and 10000 seconds; or select 0 when inactivity should not enforce automatic logout. Security Session InactivityTimeout: 0 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 84: Serialport Settings

    Off: The user can access the codec via the serial port without any login. On: Login is required when connecting to the codec via the serial port. SerialPort LoginRequired: On Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 85: Sip Settings

    SIP ListenPort: On Example: SIP OCSP Mode Not applicable in this version. SIP OCSP DefaultResponder Not applicable in this version. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 86

    On: When set to On, the system will search for available Turn servers in DNS, and before making calls the system will test if port allocation is possible. SIP Profile Turn DiscoverMode: On Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 87

    Format: String with a maximum of 128 characters. SIP Profile 1 TlsVerify: Off Example: SIP Profile 1 Authentication 1 LoginName: "" Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 88

    Requires user role: ADMIN Value space: <Standard/Cisco> Value space: <Off/On> Standard: Use this when registering to standard SIP Proxy (tested with Cisco TelePresence Off: Connect to the single proxy configured first in Proxy Address list. VCS and Broadsoft) On: Set up multiple outbound connections to servers in the Proxy Address list.

  • Page 89: Standby Settings

    DefaultCameraPosition: After a reboot the camera position will be set to the factory default position. Standby BootAction: DefaultCameraPosition Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 90: Systemunit Settings

    Requires user role: ADMIN Value space: <Off/On> Off: Disable logging. On: Enable logging. SystemUnit CallLogging Mode: On Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 91: Time Settings

    Time DateFormat: DD _ MM _ YY Example: Time Zone This has been replaced with the Time OlsonZone setting as of software version TC7.2. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 92: Time Olsonzone

    North_Dakota/New_Salem, America/Ojinaga, America/Panama, America/Pangnirtung, America/ Istanbul, Europe/Jersey, Europe/Kaliningrad, Europe/Kiev, Europe/Lisbon, Europe/Ljubljana, Paramaribo, America/Phoenix, America/Port-au-Prince, America/Port_of_Spain, America/ Europe/London, Europe/Luxembourg, Europe/Madrid, Europe/Malta, Europe/Mariehamn, D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 93

    Universal, W-SU, WET, Zulu> Range: Select a time zone from the list. Range: Select a time zone from the list time zones. Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 94: Userinterface Settings

    Custom: Use the custom wallpaper as background image on the screen. If no custom wallpaper is uploaded to the system, the setting will revert to the default value. UserInterface Wallpaper: None Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 95: Userinterface Touchpanel Defaultpanel

    On: The user preferences are available from the Settings menu on the Touch controller. UserInterface UserPreferences: On Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 96: Video Settings

    Range: Choose for how long self-view remains on. The valid range is between 1 and 60 seconds. Video CamCtrlPip CallSetup Duration: 10 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 97

    Value space: <1> Range: This value is fixed and cannot be changed. Video Input Connector 1 CameraControl CameraId: 1 Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 98

    Example: values at the extremes (16 - 235). This is defined in CEA-861-E. Video Input Connector 2 RGBQuantizationRange: Auto Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 99

    Off: No adjustment of the aspect ratio. On: Let the system automatically adjust aspect ratio. Video Layout Scaling: On Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 100

    LowerRight: The presentation PiP will appear in the lower right corner of the screen. Video PIP Presentation DefaultValue Position: Current Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 101: Video Osd Encryptionindicator

    Not supported in this version. LowerRight: The self-view PiP will appear in the lower right corner of the screen. Video SelfviewDefault PIPPosition: Current Example: D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 102: Video Output Connector [1] Rgbquantizatonrange

    Set the resolution and refresh rate for the connected screen. This value is fixed and cannot be changed. Requires user role: ADMIN Value space: <Auto> Video WallPaper This has been replaced with the UserInterface Wallpaper setting. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 103: Experimental Settings

    Setting passwords Appendices Experimental settings The Experimental settings are for testing only and should not be used unless agreed with Cisco. These settings are not documented and WILL change in later releases. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.

  • Page 104: Setting Passwords

    Cisco TelePresence SX10 Quick Set Administrator Guide Contents Introduction Web interface System settings Setting passwords Setting passwords Appendices Chapter 4 Setting passwords D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 105: Setting The System Password

    You can read more about how to create and manage user accounts in the ► User administration section. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 106: Appendices

    Cisco TelePresence SX10 Quick Set Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Appendices D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 107: Connecting User Interface

    Then you must use a PoE rated displayed in the top banner. cable. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 108: Cisco Vcs Provisioning

    Read the Cisco TMS Provisioning Deployment Guide to find example value are included. how to upload the file to Cisco TMS, and how to set the desired values for the parameters to be provisioned. If not set by Cisco TMS, the default values will be used.

  • Page 109: Optimal Definition Profiles

    Motion. You can read more about the video settings in the ► System settings chapter. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 110: Clearpath — Packet Loss Resilience

    Go to System Configuration (on the web interface): • Navigate to Conference 1 > PacketLossResilience > Mode Choose Off to disable ClearPath and On to enable ClearPath. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 111: Factory Resetting The Video System

    Navigate to the contact information in the upper, left corner of the screen and press OK on the remote control. Then open the Settings menu. D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 112: Technical Specification

    • 640 × 480 @ 30 fps (VGA) 60950-1-07 • 704 × 576 @ 30 fps (4CIF) • Complies with FCC CFR 47 Part15 Class A D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 113

    All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.

  • Page 114: Supported Rfcs

    RFC 3890 A Transport Independent Bandwidth Modifier Feedback for SDP • RFC 4587 RTP Payload Format for H.261 Video Streams D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 115: User Documentation On The Cisco Web Site

    Setting passwords Appendices Appendices User documentation on the Cisco web site In general, user documentation for the Cisco TelePresence products is available here: The documents are organized in the following categories: Installation guides: ► http://www.cisco.com/go/telepresence/docs Install and Upgrade > Install and Upgrade Guides You have to choose your product category in the right pane until you find your product.

  • Page 116: Intellectual Property Rights

    NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE On our web site you will find an overview of the worldwide Cisco contacts. PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE- NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED ► ...

Comments to this Manuals

Symbols: 0
Latest comments: