AEG VCR-D 4501 Service Manual page 69

STEP START-
/LOC. ING
No. No.
Loading Arm (SP)
[34] [26]
Assembly
Loading Arm (TU)
[35] [34]
Assembly
M Brake (TU) Assembly
[36] [16],[26]
(HI)
M Brake (SP) Assembly
[37] [2],[26]
(HI)
[38] [37] Tension Lever Assembly
[39] [38] T Lever Holder
[40] [40] M Gear (HI)
[41] [15],[40] Sensor Gear (HI)
[42] [36],[40] Reel T
[43] [38] Reel S
Moving Guide S
[44] [34],[38]
Preparation
Moving Guide T
[45] [35]
Preparation
[46] [19] TG Post Assembly
[47] [27] Rack Assembly
[48] [47] F Door Opener
[49] [49] Cleaner Assembly
[50] [49] CL Post
↓ ↓
(1) (2)
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
PART
Fig. No.
B DM2,DM14
B DM2,DM14
T DM1,DM15
T DM1,DM15 *(P-6)
T DM1,DM15
T DM15
T DM1,DM15 (C-6)
T DM1,DM15 (C-7)
T DM1,DM15
T DM1,DM15
T DM1,DM16
T DM1,DM16
T DM1,DM16 *(L-11)
R DM17
R DM17
T DM1,DM6
T DM6
↓ ↓
(3) (4)
2-4-2
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
*(L-10)
*(L-12)
↓ ↓
(5) (6)
.
INSTALLATION
ADJUSTMENT
CONDITION
(+)Refer to Alignment
Sec.Pg.2-4-8
(+)Refer to Alignment
Sec.Pg.2-4-8
(+)Refer to Alignment
Sec.Pg.2-4-8
↓
(7)
H9500DA