Completed Installation Illustration - Sears 39.18205SR - 1/2 HP Owner's Manual

BEFORE YOU BEGIN, PLEASE TAKE SOME TIME TO CAREFULLY EXAMINE THE ILLUSTRATIONS OF AS
TYPICAL GARAGE DOOR OPENER INSTALLATION ON BOTH A SECTIONAL AND A ONE-PIECE DOOR.
Some installation instructions vary for sectional and one-piece doors. Follow only those instructions which apply
to your door type.
Do you have a finished ceiling in your garage? If so, you will need a support bracket and additional fastening
hardware. Refer to Step 4, Page 13 for specific requirements.
Do you have a lightweight or metal door (or does it have glass panels)? If so, horizontal and vertical
reinforcement is required. Refer to Step 8, Page 17.
SECTIONAL
DOOR INSTALLATION
Horizontal & Vertical
Support - Not Supplied
(Needed Only for
Lightweight Garage
Door Installation)
ONE-PIECE DOOR INSTALLATION
Support Bracket
and Fastening
Hardware
(Not Supplied)
Header
Bracket
Horizontal
Garage Door
Reinforcement
(If needed)
Header
Door Bracket
Garage
Door
Reinforcement (if needed)
Support Bracket
and Fastening
Hardware
(Not Supplied)
Cable
Pulley Bracket
Header
Bracket
Door Bracket
& Plate
Garage
Header
Door
4
Cable Pulley
Bracket
Trolley
Cable
Chain
Garage
Door
Spring
Straight
Door
Arm
Emergency
Curve
Tolley
Door
Release
Arm
& Plate
Vertical Garage Door
Finished
Ceiling
Cable
Trolley
Chain
Emergency
Trolley
Release
Curve
Straight
Door
Door
Arm
Arm