Siemens Hicom 150 H Operating Instructions Manual page 27

6WHS#E\#6WHS
20 Account code
3 Trunk group mode
+=Next
US:Save
UK:Save entry
*
=Change
0=Non-verified
1=Forced
'HILQLQJ#WKH#(QWU\#0RGH
You can define one of two criteria for account code en-
try for each trunk group.
Non-verified entry (default):
You can enter an account code on any telephone before
a call is initiated and, therefore, also before a trunk is
seized. While a call is in progress, you can enter an ac-
count code only from a system telephone.
Forced entry:
You must enter an account code before a call is initiated
(after a trunk group is seized). The account code is then
verified in accordance with the variant you have pro-
grammed Æ page 26.
Account code entry is not mandatory for incoming calls.
Prerequisite: System administration has been started
Æ page 7.
Select and confirm.
Select and confirm.
or
Enter the code.
Select trunk group:
or Press these keys.
or
Confirm.
or
Enter the trunk group directly and
Confirm your entry.
Enter the code.
or
Select and confirm.
Select and confirm.
or
or
or Enter the code
$FFRXQW#&RGH
5: