Sony Trinitron CPD-E210 Service Manual page 17

4-7. DIGITAL CONVERGENCE ADJUSTMENT
Convergence (Low) Mode
1. Adjust the H.STAT and V.STAT with "HSTAT" and
A. Horizontal Convergence
B. Vertical Convergence
2. Repeat the procedure of A and B so that the convergence
Convergence (High) Mode
1. Adjust the H.STAT and V.STAT with "HSTAT-HI" and
A. Horizontal Convergence
http://cxema.ru
"VSTAT".
Adjust each misconvergence point in sequence.
Adjust each misconvergence point in sequence.
of the entire screen is within the specification.
"VSTAT-HI".
Adjust each misconvergence point in sequence.
B. Vertical Convergence
Adjust each misconvergence point in sequence.
2. Repeat the procedure of A and B so that the convergence
of the entire screen is within the specification.
4-8. CONVERGENCE SPECIFICATION
B
A
312 mm
— 17 —
CPD-E210
A Zone:
Primary Mode Others
H: < 0.25mm H: < 0.3mm
V: < 0.25mm V: < 0.3mm
B Zone:
Primary Mode Others
H: < 0.3mm H: < 0.4mm
V: < 0.3mm V: < 0.4mm