Download Print this page

JRC JFV-700 Installation Manual: Grounding Work

Color echo sounder.
Hide thumbs

Advertisement

2.6 Grounding Work

When installing the system, make sure that the grounding cable
is connected to the grounding terminal. Otherwise, an electric
shock can result when failure or leakage developed on the sys-
tem.
1. For grounding of the echo sounder body,.
0.5 thick × 30 copper plate shall be used for the grounding cable. Flat braided
copper wire shall not be used for this purpose.
The grounding cable must be routed along the shortest distance.
2. When grounding the support pipe, provide a grounding cable on the pipe or a
grounding cable to the support pipe clamp on the broadside, then connect is to the
grounding terminal on the echo sounder.
27 MHz
radio
equipment
Plotter
•@•@
Grounding plate
Echo sounder
•@ Power cable
Boat ground
Wiring between Each Equipment
25
‚f‚o‚r
Transducer cable
Radar

Advertisement

   Related Manuals for JRC JFV-700

   Related Content for JRC JFV-700

This manual also for:

Jfv-700hp

Comments to this Manuals

Symbols: 0
Latest comments: