Note: Follow the assembly procedure in the numerical order given.
OPTICAL PICK-UP COMPLETE ASS'Y
GEAR (LOMINI) / (LOAD 1) ASS'Y
3 Attach the gear (LOAD 1) ass'y
with its facing inside.
gear (LOAD 2)
– 2 –
1 Move the lever (LOCK 3) in direction A , and return it a little in
direction B from the position where the chuck plate is moved down
to the lower limit.
2 optical pick-up complete ass'y
Note: Insert the shaft (A) first.
2 Attach the gear (LOMINI) at the position
shown in Fig. A.
shaft (rotary prevention C)
4 stop ring 1.5 (E type)
3 stop ring 2.0 (E type)
4 tension spring (DH)
1 Move the lever (LOCK 3)
fully in direction B to
move the chuck plate up.