Makita TM3000C Instruction Manual page 7

Dust extraction attachment
(optional accessory)
4
5
6
7
1. Joint
2. Nozzle band
3. Dust nozzle
4. Dust attachment
5. Felt ring
6. Pad
7. Application tool installation bolt
012854
3
1
2
2
3
1. Nozzle band
2. Protrusions
3. Holes
013052
Install joint, dust nozzle and dust attachment.
•
Install the nozzle band on the tool so that its
•
protrusions fit in the holes in the tool to secure it.
Put the felt ring and the sanding pad on the dust
•
attachment and then secure them with the
application tool installation bolt.
012855
When you wish to perform cleaner operation, connect a
vacuum cleaner to your tool. Connect a hose of vacuum
cleaner to the dust extraction attachment (optional
accessory).
7
1
1