Download  Print this page

Operating Dvd Player With The Remote Control - Yamakawa DVD-238 User Manual

Yamakawa dvd-238 users manual
Hide thumbs

Advertisement

Table of Contents
Getting Started
Digital Audio Output
If you have another audio decoder which can decode Dolby Digital / Dts, connect the optical jack of the DVD player to
the audio decoder (such as amplifier)via optical cable.
Then set the SPDIF "on" on OSD. you can use the optical digital audio output to enjoy the original audio.The instruction
is as follows:

Operating DVD player with the remote control

When using the remote control, point to the remote sensor on the DVD player.
Distance:
Maximum of 7m
Angle:
Approximately 30
0
from each direction.
*Do not expose the remote sensor directly to direct sunlight or lighting apparatuses. The DVD player will be malfunctioned if you do so.
07
DVD player
Surround left
speaker
Optical or coaxial
Audio decoder
Front left
speaker
Center speaker
Speaker amplifier
Subwoofer
speaker
30
30
Surround right
90-260V~50/60Hz 30W
speaker
Front right
speaker

Advertisement

Table of Contents
loading

  Related Manuals for Yamakawa DVD-238