Inserting Batteries - Samsung UN40D6400UF Service Manual

✎
NOTE
y The remote side doesn't work when the QWERTY side is up, and vice versa.
✎
NOTE

Inserting Batteries

Inserting Batteries
y The remote side doesn't work when the QWERTY side is up, and vice versa.
✎
NOTE
Inserting Batteries
1
y The remote side doesn't work when the QWERTY side is up, and vice versa.
Inserting Batteries
1
1
y Slide out the battery cover.
y Slide out the battery cover.
3
3
y Slide out the battery cover.
3
y Pull the battery tray out.
y Pull the battery tray out.
Initial Pairing
y Pull the battery tray out.
Initial Pairing
1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB" will be displayed on the
Initial Pairing
screen.
1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB" will be displayed on the
2. Press
SYM
Initial Pairing
screen.
✎
A TV can be paired with only one QWERTY Remote.
1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB" will be displayed on the
2. Press SYM and
When turn on the TV, start the pairing process about 30 seconds later.
screen.
✎
A TV can be paired with only one QWERTY Remote.
2. Press and
SYM
To perform the pairing process again
When turn on the TV, start the pairing process about 30 seconds later.
✎
1. If the QWERTY Remote have been paired before, press @ and ← on the QWERTY side more than 3 seconds.
A TV can be paired with only one QWERTY Remote.
To perform the pairing process again
When turn on the TV, start the pairing process about 30 seconds later. "RESET OK" will be displayed on the LCD of QWERTY remote.
1. If the QWERTY Remote have been paired before, press @ and ← on the QWERTY side more than 3 seconds.
To perform the pairing process again
2. Press MUTE, 0,
To perform the pairing process again
"RESET OK" will be displayed on the LCD of QWERTY remote.
Press the buttons in 4 seconds, without waiting any OSD displayed on the TV.
1. If the QWERTY Remote have been paired before, press @ and ← on the QWERTY side more than 3 seconds.
2. Press MUTE, 0,
"RESET OK" will be displayed on the LCD of QWERTY remote.
3. Follow the initial pairing process in 3 minutes.
Press the buttons in 4 seconds, without waiting any OSD displayed on the TV.
2. Press MUTE, 0, ✎
If the initial pairing process doesn't finish in 3 minutes, perform the whole process again.
3. Follow the initial pairing process in 3 minutes.
Press the buttons in 4 seconds, without waiting any OSD displayed on the TV.
✎
If the initial pairing process doesn't finish in 3 minutes, perform the whole process again.
3. Follow the initial pairing process in 3 minutes.
✎
If the initial pairing process doesn't finish in 3 minutes, perform the whole process again.
[UD6900-NA]BN68-03488A-02L03.indb 9
Caution
• OFN (Optical Finger Navigation) Sensor In full browser function, it can be used as the pointer.
[UD6900-NA]BN68-03488A-02L03.indb 9
• If the user doesn't press any button during 30 seconds, the sensor will be off automatically.
[UD6900-NA]BN68-03488A-02L03.indb 9
• To wake up the sensor, press any button on the QWERTY side.
SOCIAL TV menu, etc.
Convenient QWERTY keyboard to type characters in SMART HUB and
SYM: Enables the symbol printed on the lower right side of each button.
SOCIAL TV menu, etc.
Convenient QWERTY keyboard to type characters in SMART HUB and
SYM: Enables the symbol printed on the lower right side of each button.
SOCIAL TV menu, etc.
SYM: Enables the symbol printed on the lower right side of each button.
and buttons at the same time more than 2 seconds.
TAB
TAB buttons at the same time more than 2 seconds.
buttons at the same time more than 2 seconds.
TAB
MUTE and 0 on the remote side of new QWERTY Remote facing the TV.
MUTE and 0 on the remote side of new QWERTY Remote facing the TV.
MUTE and 0 on the remote side of new QWERTY Remote facing the TV.
2
2
2
y Push the button right.
y Push the button right.
4
4
y Push the button right.
4
y Insert 4 AAA batteries in the tray, insert the battery tray
into the QWERTY Remote and put the cover back on.
y Insert 4 AAA batteries in the tray, insert the battery tray
into the QWERTY Remote and put the cover back on.
y Insert 4 AAA batteries in the tray, insert the battery tray
into the QWERTY Remote and put the cover back on.
English - 9
English - 9
English - 9
press any button on the
the sensor will be off
To wake up the sensor,
QWERTY side.
automatically.
press any button on the
To wake up the sensor, QWERTY side.
2. Product specifications
press any button on the
QWERTY side.
2011-02-16 오전 9:53:0
2011-02-16 오전 9:53:09
2011-02-16 오전 9:53:09
2-23