Ubiquiti TS-5-POE User Manual page 8

TOUGHSwitch PoE User Guide
™
Front Panel LEDs
Power/Link/Act
LED State
Off
Power/
Link
Amber
Off
PoE Green
Amber
Off
Amber
Speed/
Amber Flashing
Link/Act
Green
Green Flashing
Ubiquiti Networks, Inc.
Speed/Link/Act
PoE
Status
No Power/No Link
After bootup, the LED indicates
power. After an initial link is
established, the LED indicates a
10/100 Mbps connection. If the
link terminates, the LED turns
off until a link is re-established.
If the unit reboots, the LED will
again indicate power until a link is
established.
No Power over Ethernet
24V Power over Ethernet
48V Power over Ethernet
No link
Link established at 10/100 Mbps
Link activity at 10/100 Mbps
Link established at 1000 Mbps
Link activity at 1000 Mbps
Chapter 1: Overview
5