Ubiquiti TS-5-POE User Manual page 6

TOUGHSwitch PoE User Guide
™
TOUGHSwitch PoE PRO
Back Panel
Ventilation Holes
Note: There are additional ventilation holes on the
top and sides of the TOUGHSwitch.
Front Panel Ports
Management
USB
Interface Description
10/100 Mbps port for management. Traffic between
the Management port and numbered ports will
Management be limited to 10/100 Mbps and, under heavy
load, may cause performance degradation of the
TOUGHSwitch.
USB Reserved for future use.
10/100/1000 Mbps ports for switching and PoE (also
1-8
available for management by default).
To reset to factory defaults, press and hold the Reset
Reset button for more than 10 seconds while the unit is
already powered on.
Ubiquiti Networks, Inc.
Power
1-8
Reset
Front Panel LEDs
Power/Link
PoE
LED State
Off
Power/
Link
Amber
Off
PoE Green
Amber
Off
Amber
Speed/
Amber Flashing
Link/Act
Green
Green Flashing
Chapter 1: Overview
Speed/Link/Act
Status
No Power/No Link
After bootup, the LED indicates
power. After an initial link is
established, the LED indicates a
10/100 Mbps connection. If the
link terminates, the LED turns
off until a link is re-established.
If the unit reboots, the LED will
again indicate power until a link is
established.
No Power over Ethernet
24V Power over Ethernet
48V Power over Ethernet
No link
Link established at 10/100 Mbps
Link activity at 10/100 Mbps
Link established at 1000 Mbps
Link activity at 1000 Mbps
3