Accessing The Configuration Interface; Chapter 3: Navigation - Ubiquiti TS-5-POE User Manual

TOUGHSwitch PoE User Guide
™

Chapter 3: Navigation

The Configuration Interface is an advanced operating
system accessed through a simple and intuitive user
interface. The TOUGHSwitch uses the Configuration
Interface for convenient configuration and management
via a web browser.
If your TOUGHSwitch model is the TOUGHSwitch PoE
or TOUGHSwitch PoE PRO, proceed to the next section,

Accessing the Configuration Interface.

If your TOUGHSwitch model is the TOUGHSwitch PoE
CARRIER, proceed to "Configuring the TOUGHSwitch
PoE CARRIER" on page 12.
Accessing the Configuration
Interface
Connect to the Configuration Interface by performing the
following steps:
1. Ensure that your computer (or other host machine)
is connected to the Management port on the
TOUGHSwitch.
Note: By default, you can configure the
TOUGHSwitch via any port; however, we
recommend the Management port. (Access to
the Configuration Interface can be limited to the
Management port only. You can configure this
setting on the Device tab; see "Management
Network Settings" on page 18.)
Ubiquiti Networks, Inc.
2. Configure the Ethernet adapter on your host system
with a static IP address on the 192.168.1.x subnet (for
example, 192.168.1.100).
3. Launch your web browser. Type https://192.168.1.20
in the address field. Press enter (PC) or return (Mac).
4. The login screen will appear. Enter ubnt in the
Username and Password fields. Click Login.
5. The Configuration Interface will appear, allowing you to
customize your settings as needed. You can enable PoE
on the Ports tab; see "PoE" on page 24.
Chapter 3: Navigation
11