Pioneer VSX-D409 Service Manual page 57

QQ
3 7 63 1515 0
Display
1
SIGNAL
SELECT
ANALOG
DIGITAL
DIGITAL
DTS
8
1 DTS indicator
Lights when DTS mode is being used.
2
2
PRO LOGIC indicator
When the 2 Surround/DTS mode of the receiver is on, this
lights to indicate playback of a two channel source.
3 DSP indicator
TE
L 13942296513
Lights when any Advanced Theater or DSP mode is
selected.
4 MIDNIGHT indicator
Lights when MIDNIGHT listening mode is in use.
5 DIRECT indicator
Lights when source DIRECT is in use. This function
bypasses all tone, balance, DSP and Dolby Surround
effects.
6 MONITOR indicator
Lights when MONITOR is selected to hear a recording as
it's being made.
7 TUNER indicators
MONO:
Lights when the mono mode is set using the
MPX MODE button.
TUNED:
Lights when a broadcast is being received.
STEREO:
Lights when a stereo FM broadcast is being received in auto
stereo mode.
8 SIGNAL SELECT indicators
Light to indicate the type of input signal assigned for the
current component (see "Front Panel", -, SIGNAL
SELECT).
ANALOG : Lights when an analog signal is selected.
DIGITAL : Lights when a digital audio signal is selected.
www
2 DIGITAL : Lights when a DOLBY DIGITAL signal is
played.
DTS: Lights when a source with DTS audio signals is
played.
.
http://www.xiaoyu163.com
2 3
PRO LOGIC DSP MIDNIGHT
DIGITAL ATT LOUDNESS
9 0 - =
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
4 5
DIRECT MONITOR
S.BASS
SP
~
9 2 DIGITAL indicator
When the 2 Surround/DTS mode of the receiver is on, this
lights to indicate playback of a Dolby Digital signal.
0 CHARACTER display
Shows the radio frequency or function (DVD/LD, CD, etc.)
receiver is using .
Q Q
3 6 7 1 3 1 5
- OVERLOAD indicator
This lights when an analog signal is too strong (the SIGNAL
SELECT needs to be on ANALOG). It indicates the sound is
distorting and the signal should be reduced.
= ATT indicator
Lights when ATT is used to attenuate (reduce) the level of
the input signal (can only be used in ANALOG mode).
~ LOUDNESS indicator
Lights when the LOUDNESS, used to boost the bass and
treble in quiet listening, is on.
! SPEAKER indicator
Shows if the speaker system is on or not. SP 3A means
speakers are switched on. SP 3 means speakers are
switched off.
@ MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is maintained
even when the power is off. ---dB indicates the minimum
level, and 0dB indicates the maximum level.
• Depending on the level settings you make for
individual channels, the MAX level can range
between –10dB and 0dB.
co
.
VSX-D409, VSX-D309
9 4 2 8
6 7
MONO
TUNED
AB STEREO
RF ATT
!
0 5 8 2 9 9 4 2 8
m
9 9
EON
RDS
dB
@
9 9
57