Configuring General Call Settings
Configure the general call settings using this option.
1. From the Home screen, tap
and then tap Call settings.
– or –
From the Home screen, press
Settings
My device
My device
2. Tap one of the following options:
• Call rejection: allows you to manage your rejection mode and
rejection list.
–
Auto reject mode: sets the phone to automatically reject
incoming calls or messages.
–
Auto reject list: provides access to current rejection entries
and numbers.
• Set up call rejection messages: allows you to manage both
existing rejection messages and create new ones.
• Answering/ending calls: allows you to manage the settings
for answering and ending calls.
–
The home key answers calls allows you to press
answer the phone.
(Phone). Press
and then tap
(My device tab)
Call.
–
Voice control allows you to answer incoming voice calls using
voice.
–
The power key ends calls allows you to press the power key
to end the current call.
• Turn off screen during calls: allows you to force the screen to
turn off during an active call.
• Call alerts: allows you to assign call alert tones and activate
call alerts and vibration.
–
Call vibrations: vibrates the phone when the called party
answers. Choose from: Answer vibration or Call-end vibration.
–
Call status tones: assigns sounds settings during the call.
Choose from: Call connect tone, Minute minder, and Call end
tone.
–
Alerts on calls: selects whether alarm and message
notification is turned off during a call.
• Call accessories: allows you to assign headset settings during
incoming calls.
–
Automatic answering configures the device to automatically
answer and incoming call when a headset is detected.
to
–
Automatic answering timer configures the time delay before
the device automatically accepts the incoming call.
Changing Your Settings
311