Mitsubishi Electric FR-A700 Technical Manual page 352

2.18.4 Extended parameter display and user group function [Pr. 160, 172 to 174*]
common
(common)
Parameter which can be read from the operation panel and parameter unit can be restricted.
[Pr. ] Name
A700 F700 E700
User group read selection
160
D700
Extended function display
selection
User group registered
172
display/batch clear
173 *1 User group registration
174 User group clear
*1
*1 The values read from [Pr. 173, Pr. 174] are always 9999.
(1) Display of simple mode parameters and
extended parameters [Pr. 160]
When [Pr. 160 = 9999], only the simple mode
parameters can be displayed on the control panel (FR-
DU07) and parameter unit (FR-PU04/FR-PU-07). (Refer
to the parameter list on page 120, for the simple mode
parameters.)
When [Pr. 160 = 0], simple mode parameters and
extended parameters can be displayed.
All parameter can be read regardless of [Pr.160]
setting when performing parameter read using a
communication option in
When reading
communication made
or PU connector in
A700 F700
parameters can be read regardless of [ Pr. 160] setting
by setting [Pr. 550 NET mode operation command source
selection] and [Pr. 551 PU mode operation command source
selection] as the below table.
Inverters [Pr. 551]
2(PU)
A700
3(USB)
2(PU)
F700
Initial Value Setting Range
A700 E700
0
F700 D700
9999
0
9999 0 to 999, 9999
9999 0 to 999, 9999
.
A700 F700 E700
parameters with RS-484
by RS-485 terminal
E700 D700
[Pr. 550] OP
1
*1
9999
Invalid
(auto detect) *1
1
9999(auto
*1
Invalid
detect)
*1
(*[Pr. 172 to 174] are not available for
Description
Only the simple mode
9999 parameters can be
displayed.
The simple mode and
0 extended parameters can
be displayed
Only the parameters
1 registered to the user group
can be displayed.
Displays the number of
(0 to 16) parameters registered as a
user group (Reading only)
Batch clear the user group
9999
registration
Set the parameter numbers to
be registered to the user
group.
Set the parameter numbers to
be cleared from the user
group.
Inverters
E700
D700
*3
*1 Indicates initial value.
*2 OP indicates a communication option.
*3 Parameter read cannot be performed when read is
restricted by the [Pr. 296 Password lock level] setting under
the NET mode. (Refer to page 387)
in
[Pr. 15 Jog frequency], [Pr. 16 Jog acceleration/
, all
deceleration time], and [Pr. 991 PU contrast adjustment]
are displayed as simple mode parameter when the
parameter unit (FR-PU04/FR-PU07) is fitted.
(2) User group function [Pr. 160, 172 to
*2
174]
A700
—
The user group function is designed to display only
the parameters necessary for the setting.
—
Among all parameters, a maximum of 16 parameters
can be registered to the user group. When [Pr. 160 =
1], only parameters registered in the user group can
be accessed
386
PARAMETER
Available Inverters
A700
F700
E700
[Pr. 551] [Pr. 550]
3(USB) 2(PU)
9999 9999(auto
(auto detect) detect)
*1
4(operation
panel)
—
9999(auto
detect)
*1
F700 E700
for reading and writing.
.)
D700
D700
—
—
—
—
OP
*2
—
Invalid
*1
—
(The