Health And Safety Recommendations - Motorola AP-621 Series Installation Manual

Access point
Hide thumbs Also See for AP-621 Series:
Table of Contents

Advertisement

Regulatory Information
21
selection table. The US version will be sold / used in the US protectorates: American Samoa, Guam,
Puerto Rico, US Virgin Islands.
5.2.2 Frequency of Operation – FCC and IC
5 GHz Only
The use on UNII (Unlicensed National Information Infrastructure) Band 1 5150-5250 MHz and Band 3
5470 - 5725 MHz is restricted to indoor use only, any other use will make the operation of this device
illegal.
Devices using the 5470 – 5725 MHz band shall not be capable of transmitting in the band 5600 - 5650
MHz in the US, this "Notched" band has been disabled in the US version of the Access Point.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels
is limited by firmware.

5.3 Health and Safety Recommendations

5.3.1 Warnings for the use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices
5.3.2 Potentially Hazardous Atmospheres – Fixed Installations
You are reminded of the need to observe restrictions on the use of radio devices in fuel depots,
chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or
metal powders).
5.3.3 Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
When installed adjacent to other equipment, it is advised to verify that the adjacent equipment is not
adversely affected.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents