Mitsubishi Eclipse Workshop Manual page 81

o
o
FUEL
-
Troubleshooting
13-17
TROUBLESHOOTING
E'3EDA.
(AUTO-CRUISE CONTROL SYSTEM)
Before commencing troubleshooting. inspect each of the following sections. and if there is an
abnormality.
carry out a
repair.
(1)Check if the
installation and connection routes
of the
cables and vacuum,hoses
of the
auto-cruise
vacuum pump assembly, actuator and link assembly are
all
normal.
(2) Check if the link
assembly and
the movement of all cables are all working
smoothly.
(3) Check if there is no
excessive play or tension in
each cable.
TROUBLESHOOTING OUICK-REFERENCE CHART
Auto-cruise control system
is
canceled
when
cancellation not wanted.
or, the auto-cruise control
system
cannot be set
after an automatic cancellation.
ECU:
Electronic
control unit
o
o
o
o
o
o
,
rF$;,
@
Mitrubishi
Motors Corporation
Apr.1991
Check
the diagnosis output. (P.13-25.)
Carry
out
a
diagnosis
output
clpc! for
the
circr"iits
and check-items. (Reier to P.l3-21.)
ls
the result of the diagnosis inspection
normal?
Refer
to
the trouble
symptom -Cruise control
cannot be set"
heading.
Can
the auto-cruise control
system be set
now?
set the
auto-cruise control
system
and
conduct a
road
test.
Check
the diagnosis
code
(Refer to
P.13-26.)
Did
the problem
reoccur?
Check whether
or not
then. the whicle
was
driven
on a
steep
slope.
PWUE9o!0