Replacing A Wheel - CITROEN 2 CV4 1975 Owner's Manual

MINOR REPAIRS

Replacing a Wheel

TOOL KIT
The spare wheel and jack, the starting handle, and the wooden block
are positioned in the boot (trunk).
REMOVAL (Fig. 37 and 38)
Engage fully the handbrake
Position the wooden block under the wheel directly diagonally
opposite the one which is to be changed. If the road is on a slope,
Fig. 37 Fig. 38
wedge the wheel on the downward side.
37 - Replacing a front wheel
1 - Lifting arm Unlock but do not slacken the three wheel nuts with the wheel brace.
2 - Support
3 - Screw
Place the base of the jack well under the car and turned slightly
towards the wheel to be changed, so as to avoid contact with the
38 - Replacing a rear wheel
bodywork in the final stage of jacking.
Engage lifting arm (1) fully into socket (2) (these sockets are
situated under the front and rear doors).
Turn the operating screw (3) clockwiase by hand until the jack is in
firm contact.