JVC RX-DV3SL Service Manual page 6

RX-DV3SL
Removing each board connected to the
rear side of the main board
Prior to performing the following procedures, remove
the top cover and rear panel.
1. Cut off the tie band fixing the harness.
2. Disconnect the DSP board from the connector
CN612 on the main board,
3. Disconnect the card wire frome the connecter CN614
on the main board.
4. Disconnect the S-video board from the connector
CN412 on the main board.
Amplifier board
CN231
CN241
CN231
CN241
Main
Power
board
/Fuse
board
1-6
(See Fig.6 to 10)
CN212
CN612
S-video
board
Fig.9
Front panel assembly
CN212
CN612
CN412
Tuner
board
Fig.10
Tie
band
F
G
Amplifier board
Tuner
board
Amplifier board
CN231
CN241
CN212
CN602
CN231
CN241
Amplifier
board
Fig.6
CN212
DSP board
CN612
S-video
board CN412
Fig.7
Fig.8
CN201
CN212
DSP
board
CN612
CN602
DSP
board
CN612
S-video
board