Samsung SV-7000W Service Manual page 95

Disassembly and Reassembly
1-2-25 Cylinder Ass'y Removal
1) Remove the 3 Screws Œ, ˇ, ˆ.
2) Remove the Plate Cylinder A, B, C ´, ¨, Ø in the
direction of arrow.
3) Lift the Cylinder AssÕy ∏.
Note :
1) When reinstalling, push the Plate Cylinder A, B ¨,
Ø in the reverse of arrow and then, tighten the
2 Screws ˇ, ˆ.
2) Take care not to touch the Cylinder AssÕy and the
tape guide post at reinstalling Plate Cylinder C ´.
3) Take care not to touch the Cylinder AssÕy with
screw driver at reinstalling the Plate Cylinder C ´.
ΠSCREW
´ PLATE CYLINDER C
ˇ SCREW
¨ PLATE CYLINDER B
Fig. 1-28 Cylinder Ass'y Removal
1-16
∏ CYLINDER ASS'Y
ˆ SCREW
Ø PLATE CYLINDER A
1-2-26 Belt Pulley Removal
1) Remove the Belt Pulley Œ.
Note : Take extreme care not to touch the grease on
Belt Pulley Πat assembling or reassembling.
ΠBELT PULLEY
Fig. 1-29 Belt Pulley Removal
1-2-27 Lever Head Cleaner Ass'y Removal
(Optional)
1) Release the Hook Œ.
2) Lift the Lever Head Cleaner AssÕy ´.
Fig. 1-30 Lever Head Cleaner Ass'y Removal
´ LEVER HEAD CLEANER ASS'Y
ΠHOOK
Samsung Electronics