Page 1
Supplemental Manual This document describes important points regarding ink. Please be sure to read this document. The content of “Installing the Ink Cartridges” has been changed. Part of ”Setup Guide” has been changed with support of the ECO-UVS ink. When you install the ink cartridges for the first time, be sure to read ”Installing the Ink Cartridges” in page 2 of this document, or ”Installing the Ink Cartridges (LEC-330/ LEC-540/ LEJ-640)”...
Installing the Ink Cartridges (LEC-300A) Filling with Ink for the First Time When installing ink cartridges for the first time, clean the print heads with the cleaning solution, and then fill with ink of each color. This operation requires four SOL INK cleaning cartridges. This operation requires four UNUSED SOL INK cleaning cartridges.
Page 5
Installing the Ink Cartridges (LEC-300A) At the locations shown in the figure, affix the cartridge-slot labels matching the se- lected ink type. Affix here. Back of the machine Ink cartridge cover ECO-UV CMYKGlW Ink type (Cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge, and one white ink cartridge are used.) Cartridge-slot None...
Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong car- tridges when filling ink, the condition cannot be restored easily. Contact your authorized Roland DG Corp. dealer or us., if you filled ink with wrong cartridges inserted.
Page 7
Installing the Ink Cartridges (LEC-300A) Switch on the main power switch. Main power switch Hold down and press the sub power switch. to select the language you want. MENU LANGUAGE JAPANESE Press to select the unit of measurement you want LENGTH UNIT (for length).
Page 8
Installing the Ink Cartridges (LEC-300A) Make sure the drain bottle is installed. INSTALL DRAIN BOTTLE Press Insert the SOL INK cleaning cartridges into slots 1, 2, 3, and SET CL-LIQUID 1 2 3 4 FILLING INK... >> When this screen appears, pull out the SOL INK cleaning REMOVE CL-LIQUID 1 2 3 4...
Page 9
Installing the Ink Cartridges (LEC-300A) Insert the ink cartridges for the respective colors. Before you insert the ink cartridge for each color, gently shake the cartridge. Insert the ink cartridge for each color. SET CARTRIDGE 1 2 3 4 5 6 FILLING INK...
Page 10
Installing the Ink Cartridges (LEC-300A) Make sure the drain bottle is installed. CHECK DRAIN BOTTLE Press When this screen appears, filling with ink is finished. SETUP SHEET ROLL Be Sure to Keep the Ink Cartridge Cover Closed at All Times. The ink cartridge cover prevents the ink cartridges from being exposed to direct sunlight or strong illumination.
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) Ink Mode In the case of LEC-330 / LEC-540 / LEJ-640, you need to select the ink mode in accordance with the ink type. P.11, "Selecting the Ink Mode" ECO-UV gloss/gloss mode This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.
Page 12
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) At the locations shown in the figure, affix the cartridge-slot labels matching the se- lected ink mode. Affix here. Back of the machine Ink cartridge cover ECO-UV gloss/gloss mode Ink mode Cartridge-slot labels to affix After affixing...
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) Selecting the Ink Mode Be sure to make the selection of the ink mode when switching on the power for the first time. Procedure Close the front cover. If the main power switch is on, then switch it off. ...
Page 14
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) Hold down until the message appears. Main power switch ECO-UV gloss/gloss mode ECO-UV white/white mode Display screen Press at the same Press at time the same time ECO-UV gloss/white mode ECO-UVS ink mode Press at the same time...
Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong car- tridges when filling ink, the condition cannot be restored easily. Contact your authorized Roland DG Corp. dealer or us., if you filled ink with wrong cartridges inserted.
Page 16
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) Clean the print heads using the SOL INK cleaning cartridge. Check the selected ink mode. SELECT INK TYPE ECO‑UV CMYKGlGl ECO-UV gloss/gloss mode <When the selected ink mode is enabled> Press SELECT INK TYPE <When an incorrect ink mode is enabled>...
Page 17
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) When this screen appears, pull out the SOL INK cleaning REMOVE CL-LIQUID cartridges. FILLING INK... >>>>>>>> When this screen appears, cleaning is finished. CHECK DRAIN BOTTLE Make sure the drain bottle is installed, and press Insert the ink cartridges for the respective colors.
Page 18
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) Close the ink cartridge cover. Make sure the drain bottle is installed. CHECK DRAIN BOTTLE Press When this screen appears, filling with ink is finished. SETUP SHEET ROLL Be Sure to Keep the Ink Cartridge Cover Closed at All Times.
ECO-UVS ink to ECO-UV ink. You can only select [ ECO-UV CMYKWW ] (*3) when you switch the ECO-UVS ink to ECO-UV ink. On LEC-300/LEC-300A, you cannot switch the ECO-UVS ink to ECO-UV ink. LEC-300 / LEC-300A LEC-330 / LEC-540 / LEJ-640 ECO-UV CMYKGlGl ...
Switching the Ink Type Method for Switching the Ink Type This operation requires four unused SOL INK cleaning cartridges. Have these on hand before you start. Affixing the Cartridge-slot Labels. Open the ink cartridge cover. Knob Hold the knob. ...
Page 21
Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong car- tridges when filling ink, the condition cannot be restored easily. Contact your authorized Roland DG Corp. dealer or us., if you filled ink with wrong cartridges inserted.
Page 22
Be sure to perform the following operation after filling with ink. Otherwise, you cannot use Versa- Works. Procedure From the [Start] menu, click [All programs (or Programs) ] - [Roland Ver- saWorks] - [Roland VersaWorks] - [Initialize Application]. Click [ Yes ] when a confirmation message for initialization of the applica- tion appears.