Toshiba E-Studio 205L Quick Start Manual page 52

Chapter 3 REPLACEMENT OF SUPPLIES
Hanging Finisher (Optional: MJ-1031)
1
3
Push the lever to separate the Hanging Finisher
from the equipment, and then open the cover.
3
Install a new staple case into the staple cartridge.
5
Install the staple cartridge.
50
1
2
2
2
1
2
Take off the staple cartridge, and then take the
empty staple case out of the staple cartridge.
4
1
Press down the transparent cover and pull out the
seal.
6
2
1
Close the Finisher cover, and then install the
Hanging Finisher to the equipment.
Refer to the Troubleshooting Guide for details.
3
2
4
2
2