Saddle stitch unit
1
1
Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
3
Take out two empty staple cartridges.
5
2
Pull the handle of the stapler toward you, and
then lower the stapler to its original position.
2
1
2
2
Pull the handle of the stapler toward you, and
then turn it clockwise.
4
Install two new staple cartridges.
6
2
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.
Adding Staples
1
3
1
1
2
4
5
7