HP 2530-24 Installation And Getting Started Manual page 12

Introducing the Switch
1-4
These switches can be directly connected to computers, printers, and servers
to provide dedicated bandwidth to those devices, and you can build a switched
network infrastructure by connecting the switch to hubs, other switches, or
routers. In addition, these switches can be fully managed by HP SNMP-based
and browser-based network management tools.
Using HP SFPs, these products support optional network connectivity with
the following speeds and technologies:
Table 1-1. Optional Network Connectivity, Speeds and Technologies
Speed Technology
100-FX
100 Mbps
100-BX
1000-T
1000-SX
1 Gbps 1000-LX
1000-LH
1000-BX
1
For supported transceivers, visit
– In the first textbox, type J4858 (for 100-Mb and Gigabit information).
– Select any of the products that display in the dropdown list. Then click Display
selected.
– Select Product support information. Then click Manuals and find the Transceiver
Support Matrix.
For technical details of cabling and technologies see
Specifications" in the appendix A.
Cabling
Fiber (multimode)
Fiber (single mode)
Copper (twisted-pair)
Fiber (multimode)
Fiber (multimode or single mode)
Fiber (single mode)
Fiber (single mode)
www.hp.com/networking/support
"Cabling and Technology Information
Transceiver Form-
Factor and
1
Connector
SFP Connector
LC
LC
RJ-45
LC
LC
LC
LC
.