Menu - GE 20 kW Home Installation And Start-Up Manual

Menu

The following chart shows the icons for the buttons that control the system control panel.
ok
Menu
ok
ok
ok
escaPe (eXit)
ok
ok
ok
riGht arroW
Left arroW
ManuaL MoDe
off
autoMatic MoDe
ok
ok
ok
The following chart describes key sequences for accessing different programming modes;
ok
ok
ok
ok
ENTER THE MENU (VIEW SETTINGS)
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
RETURN TO LAST MENU ITEM
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
USED TO MANUALLY START THE GENERATOR. PRESS AND HOLD BUTTON TO START
THE GENERATOR.
TURNS OFF RUNNING GENERATOR, PREVENTS UNIT FROM STARTING, AND RESETS
ANY DETECTED FAULTS.
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON TO PUT UNIT INTO
AUTOMATIC MODE. IF A UTILITY POWER OUTAGE IS SENSED, THE
SYSTEM WILL START THE GENERATOR. WHEN UTILITY POWER IS RESTORED, AUTO
LETS THE ENGINE STABILIZE INTERNAL TEMPERATURES, SHUTS OFF THE GENERA-
TOR, AND WAITS FOR THE NEXT UTILITY POWER OUTAGE.
GENERAL PRESS AND HOLD [arroW Left anD arroW riGht] FOR
SET-UP THREE SECONDS TO ENTER THE PROGRAM MODE.
ADVANCED PRESS AND HOLD [arroW Left, arroW riGht anD esc] FOR
SETTINGS THREE SECONDS TO ENTER THE ADVANCED SETTINGS MODE.
WIRELESS PRESS AND HOLD [Menu anD esc] FOR THREE SECONDS TO
LINK MODE ENTER THE WIRELESS LINKING MODE.
29