Installing Kx-Te308 Maintenance Console; Installing Kx-Te308 Maintenance Console On A Pc; Setting Password/Password Security - Panasonic KX-TEA308 Installation Manual

3.1 Installing KX-TE308 Maintenance Console

3.1 Installing KX-TE308 Maintenance Console
3.1.1

Installing KX-TE308 Maintenance Console on a PC

System Requirements
Operating System
• Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
Hardware
• CPU: 300 MHz Intel Celeron or faster
• RAM: At least 128 megabytes (MB) of available RAM
• Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of
additional space for user files.
Setting the Password and Password Security
To maintain system security, a password is required to perform system programming. When KX-
TE308 Maintenance Console is started for the first time, the Quick Setup utility will ask you to set the
system password. To avoid unauthorised access and possible fraudulent dialling, do not disclose the
password.
Warning to the Installer regarding the system password
1.
Please inform the customer of the importance of the password and the possible dangers if
it becomes known to others.
2.
To avoid unauthorised access and possible fraudulent dialling, maintain the secrecy of the
password.
3.
We strongly recommend that you change the default password value to something else for
reasons of system security. It is best to use a password of 7 digits.
4.
Please change the password periodically.
5.
If a system password is forgotten, it can be found by loading a backup of the system data
into a PC, and checking the password using the KX-TE308 Maintenance Console software.
If you do not have a backup of the system data, you must reset the PBX to its factory defaults
and reprogramme it. Therefore, we strongly recommend maintaining a backup of the system
data.
For more information on how to back up the system data, refer to the on-line help that
appears by selecting the Help menu during PC programming. However, as system
passwords can be extracted from backup copies of the system data file, do not allow
unauthorised access to these files.
Note
This PBX has only one system password. It can be changed by either PT programming or PC
programming. For this reason, the password can consist of numerals only.
64 Installation Manual
® ®
® ®