1 TIMER LED
When the timer is set, this LED will remain lit even if the TV is turned off. For details, see
2 LAMP LED
Blinks in red when the lamp for the light source has burned out. For details, see "Replacing the
Lamp" on page 66.
3 POWER LED
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 68).
4 (IR) Infrared
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Press to turn on and off the TV.
Press to display MENU with TV functions and settings (see "Overview of MENU" on page 47).
Press to cycle through the video inputs. If you set a certain input to Skip in Label Video
Inputs, then the input will not appear. For details, see page 60.
In the MENU screen, this button serves as confirming the selection or setting.
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
Press to scan through channels. To scan quickly through channels, press and hold down either
–/+. In the MENU screen, these buttons serve as up/down buttons.
Outputs the audio signal.
– 4 –