Bit Rate - JVC XA-MP102A Instructions Manual

ADVANCED FEATURES
To exit SET mode:
Press MENU button (or select "EXIT" and press 6 button) in the
SET MENU.

Bit Rate:

Indicates information content of the compressed data per second. As the
bit rate is higher, the audio quality becomes higher, but the data amount
increases.
Auto Track (A.TRK):
You can select ON or OFF of the A. TRK when you record music from the
input of the external audio equipment. When ON is selected, the A. TRK
detects each track automatically and numbers each track. When the
music starts, the A. TRK starts recording and when the music stops, the
A. TRK detects silence and the player pauses. When OFF is selected, no
track is detected and recording doesn't stop if the player is in silent state.
When silent state continues for 3 seconds or more in LINE-IN mode, the
A. TRK judges this state as a turn of the track and the track is divided. The
track, therefore, is not divided in this mode if the interval of two tracks is
too short, or noise continuously occurs in the interval. In addition, if a track
has very low sound or silent part, the track is divided.
In such cases, select OFF for A. TRK from "RECORD SET" in the SET
mode and record each track manually.
28