JVC XA-MP102A Instructions Manual page 21

To select sound mode
1.
After turning on the player, press MENU button and ¢ / 4 button
to select SET mode from Main Menu, and then press 6 button to
enter that mode.
2.
Press ¢ / 4 button to select "EQ SET".
3.
Press 6 button.
4.
Press ¢ / 4 button to select the sound mode.
5.
Press 6 button to return to SET MENU.
To create sound mode (CUST)
1.
After turning on the player, press MENU button and ¢ / 4 button
to select SET mode from Main Menu, and then press 6 button to
enter that mode.
2.
Press ¢ / 4 button to select "EQ SET".
3.
Press 6 button.
4.
Press ¢ / 4 button to select "CUST".
5.
Press MENU button briefly to start editing.
The indicator of the lowest frequency is highlighted.
6.
Press ¢ / 4 button to select the frequency you want to edit.
7.
Press 6 button.
The indicator starts to blink.
8.
Press ¢ / 4 button to set the level up or down and then press
6 button to store it.
9.
Repeat Steps 6 through 8 to edit for other frequencies.
10.
Press MENU button briefly. The highlight disappears and the setting is
completed.
11.
Press 6 button to return to SET MENU.
To exit SET mode:
Press MENU button (or select "EXIT" and press 6 button) in the SET
MENU.
21