SonicWALL TZ 150 Getting Started Manual page 7

2. Enter 192.168.168.168 in the Location or Address field.
3. The SonicWALL Setup Wizard launches and guides you
through the configuration and setup of your SonicWALL TZ 150.
If the SonicWALL Setup Wizard Does Not Appear
If you cannot connect to the SonicWALL TZ 150 or the Setup
Wizard does not display, verify the following configurations:
• Did you correctly enter the SonicWALL TZ 150 management
IP address in your Web browser?
• Is your computer running pop-up blocking software?
• Are the Local Area Connection settings on your computer set
to obtain an IP address dynamically (DHCP)? see Step 7,
"Connecting Computers to Your SonicWALL TZ 150" on
page 14 for instructions on changing your Local Area
Connection settings.
• Do you have the Ethernet cable connected to your computer
and to the LAN 1 port on your SonicWALL TZ 150?
• Some browsers may not launch the Setup Wizard
automatically. In this case, log into SonicWALL TZ 150 using
"Admin" as the user name and "password" as the password.
After you log in, click the Wizards button on the
System > Status page. Select Setup to begin configuring
your SonicWALL TZ 150.
Page 6