SMSC EVB-USB5534-01 User Manual

SMSC EVB-USB5534-01 User Manual

Evb-usb5534-01 evaluation board

Advertisement

EVB-USB5534-01 Evaluation Board User Manual
Copyright © 2013 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation ("SMSC"). Product names and company names are the trademarks of their respective holders.
The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SMSC EVB-USB5534-01
Revision 1.0 (06-19-13)

USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVB-USB5534-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for SMSC EVB-USB5534-01

  • Page 1: User Manual

    Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com.
  • Page 2: Chapter 1 Overview

    The EVB-USB5534-01 Revision E Evaluation Board is a demonstration and evaluation platform featuring the SMSC USB5534B 4-port USB 3.0/2.0 hub on a 4-layer RoHS-compliant printed circuit board. The USB5534B is fully compliant with the USB 3.0 USB Specification and supports SuperSpeed (SS), Hi-Speed (HS), Full-Speed (FS), and Low-Speed (LS) USB signalling for complete coverage of all defined USB operating speeds.
  • Page 3 EVB-USB5534-01 Evaluation Board User Manual Figure 1.1 Top and Bottom Level Silk Screen and Copper Layers SMSC EVB-USB5534-01 Revision 1.0 (06-19-13) USER MANUAL...
  • Page 4: Chapter 2 Getting Started

    When the USB5534B does not detect a valid SPI Flash image or SMBus configuration upon power- up, the EVB-USB5534-01 uses internal default register settings. It also sets the Vendor ID, Product ID, Language ID, and Device ID, and additional settings from internal ROM code.
  • Page 5 Note: Refer to the Protouch MPT User Manual on using this software to program the configuration. Power Source - Self-Powered The EVB-USB5534-01 only supports self-powered operation, and is powered through one +12.0 V regulated 'wall wart' external power supply. The +12.0 V ‘wall wart’ plugs into the 2.5 mm connector J5 on the board.
  • Page 6 EVB-USB5534-01 Evaluation Board User Manual Figure 2.2 EVB-USB5534-01 Schematic Page 1 Revision 1.0 (06-19-13) SMSC EVB-USB5534-01 USER MANUAL...
  • Page 7 EVB-USB5534-01 Evaluation Board User Manual Figure 2.3 EVB-USB5534-01 Schematic Page 2 SMSC EVB-USB5534-01 Revision 1.0 (06-19-13) USER MANUAL...
  • Page 8 EVB-USB5534-01 Evaluation Board User Manual Figure 2.4 EVB-USB5534-01 Bill of Materials Revision 1.0 (06-19-13) SMSC EVB-USB5534-01 USER MANUAL...
  • Page 9: Chapter 3 User Manual Revision History

    EVB-USB5534-01 Evaluation Board User Manual Chapter 3 User Manual Revision History Table 3.1 Revision History REVISION LEVEL & DATE SECTION/FIGURE/ENTRY CORRECTION Rev. 1.0 (06-19-13) Document Release SMSC EVB-USB5534-01 Revision 1.0 (06-19-13) USER MANUAL...

Table of Contents