Remote Control; Tape Select Button - Pioneer A-209R Service Manual

[ REMOTE CONTROL ] (A-209R)
1
CD POWER button
Switches CD player power ON/OFF.
2

TAPE SELECT button

Selects the cassette No. (1 to 6) for multi-cassette changer.
3
DECK II button
To operate Deck II, press this button before pressing the
operating buttons. Also, when using a single deck, press this
button before pressing the operating buttons.
4
DECK I button
To operate Deck I, press this button before pressing the
operating buttons.
5
DISC SELECT button
Press this to select discs on a multi or twin tray compact disc
player.
6
Input selector button
Use to select the playback source.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
TAPE 1 : For playback with a cassette deck,CD recorder or
MD recorder connected to TAPE1/CD-R/MD ter-
minals.
TAPE 2 : For playback with a cassette deck or adaptor
connected to TAPE 2 MONITOR terminals.
LINE : For playback with a component connected to the
LINE terminal.
1
2
STANDBY/ON
CD
3
TAPE 2
SELECT
Ι ΙΙ
4
DECK DECK
4 ¢
DISC
–
5
SELECT STATION
CD TUNER
6
TAPE 1 TAPE 2
STEREO AMPLIFIER
REMOTE CONTROL UNIT
7
TUNER TAPE 8
7 3
9
TAPE
1 ¡
7 3 0
CD
+ -
TUNER
+
PHONO
=
VOLUME
LINE
–
Î
7
TUNER POWER button
Switches TUNER power ON/OFF.
8
TAPE POWER button
Switches the cassette deck power ON/OFF.
(Can not turn ON/OFF some cassette decks.)
9
TAPE operation buttons
2, 3
: Playback in the direction of the arrows.
7
: Stop
1, ¡ : Tape fast forward/reverse.
0
CD player operation buttons
4
: Returns you to the start of the current track.
(Track search)
¢
: Takes you to the start of the next track.
(Track search)
7
: Stop
3
: Play
-
STATION + (up), – (down) buttons
Calls each station number in sequence.
=
VOLUME + (up), – (down) buttons
+ ........................................................ Increases the volume.
– ...................................................... Decreases the volume.
NOTE:
When the accessory remote control unit is used to operate
other Pioneer components with the Î mark, it cannot be used
to operate functions which do not correspond to the functions
listed on the remote control unit.
A-209R, A-209
33