Tool Setting - Uniden iGO CAM 300 Owner's Manual

Tool Setting

In any of the modes (video, photo or playback), press the Menu button twice
to open the tool setting.
Set Date/Time
Change the date and time by using the relevant UP and DOWN keys, and
then press OK to confirm.
Auto Power Off
Use the options under this setting - Off/1Minute/3Minutes - to set the time
duration to automatically power off the unit. Choose the option 'off' if you do
not want the unit to power off automatically.
Language
Choose from a range of options and press OK. All the settings will then be
displayed in the language you have chosen.
Light Frequency
Under this setting you have the option to choose between 50Hz or 60Hz.
Select the relevant option and press OK.
Screen Saver
Use the options under this setting - Off/3minutes/5minutes/10minutes to
define the time, the screen saver is displayed on the unit.
Format
Use this setting to format the SD card.
Default Setting
Use this option to change all the settings back to the default factory settings.
16
UNIDEN iGO CAM 300
Vehicle Recorder