Dell SuperMassive 9200 Getting Started Manual page 34

Scenario A: NAT Mode Gateway
For new network installations or installations where the
SuperMassive 9200 is replacing the existing network gateway.
In this scenario, the SuperMassive 9200 is configured in NAT
mode to operate as a single network gateway. Two Internet
connections may be routed through the Dell SonicWALL
appliance for load balancing and failover purposes. Because
only a single Dell SonicWALL appliance is deployed, the added
benefits of high availability with a stateful synchronized pair are
not available.
To set up this scenario, follow the steps covered in:
• Configuring NAT Mode Gateway, page 36
A
SDHC
M0
ALARM
TEST
SonicWALL SuperMassive 9200 PWR 1
CONSOLE MGMT
DMZ Zone WLAN Zone
10GE 1GE 1GE
X16 X14 X12 X10 X8 X6 X4 X2 X0
BYPASS
STATUS
X17 X15 X13 X11 X9 X7 X5 X3 X1
ISP 1
Internet
LAN Zone
Advanced Deployment Scenarios | 33