Checking The Accessories; Inserting Batteries Into The Remote - Sony KDL-60NX815 Operating Instructions Manual

Checking the accessories

For all models
Remote (1)
Size AAA batteries (R3 type) (2)
Table-Top Stand (1)*
For KDL-60/52/40NX800, KDL-46/
40NX700 models
AC power cord (mains lead) (1)
Cable holder (1)
(except KDL-60NX800)
Black spacers (4)
(KDL-60/52/40NX800 only)
Screws (M6 × 20) (4)
(KDL-60NX800 only)
Stand rear cover (1)*
Bottom cover (1)*
(KDL-60/52/40NX800 only)
Fixing screws for Table-Top Stand
(M5 × 16) (4)
Assembling screws for Table-Top
Stand (M5 × 16) (4) (KDL-40NX800
and KDL-40NX700 only)
For KDL-60/55NX815, KDL-60/
55NX810, KDL-46/40NX710 models
Hexagon wrench(1)
Assembling screws for Table-Top
Stand (4) (except KDL-40NX710)
Assembling screws for Table-Top
Stand (2) (KDL-40NX710 only)
3D Glasses (battery included) (2)
(KDL-60/55NX815 only)
Pouch for 3D Glasses (2)
(KDL-60/55NX815 only)
3D Sync Transmitter (1)
(KDL-60/55NX815 only)
Double-sided tape (2)
(KDL-60/55NX815 only)
1
* For KDL-60NX800, attached to the TV.
Disassembled except for KDL-60/52NX800 and
KDL-46NX700. Refer to the supplied Table-Top
Stand leaflet to assemble the stand.
2
* For KDL-60NX800, attached to the TV.
4
GB
1
2
2
Inserting batteries into the
remote
1
Remove the protection sheet.
2
Push and slide the cover upward.