Advertisement
Before Downloading Software/Contents
This section will teach you how to connect your organizer to your PC and install the
downloader program. With the downloader program you can easily download software/
contents to SHARP's ZQ-700 series organizers.
Be Sure to Have
1. A SHARP ZQ-700 series electronic organizer
2. A personal computer
• IBM
®
PC or 100% compatible
• Windows
®
95, Windows
2000 Professional
®
®
• Intel
Pentium
133 MHz or higher
• 24 MB RAM (64 MB for Windows
Professional)
• 16MB free hard disk space
• 256 color VGA or better video
• Mouse or compatible pointing device
3. A Docking Module
4. The included CD-ROM (ZQ-700PC series only)
5. The Data Creation Tool (DCT) FD
• IBM is a trademark of International Business Machines Corporation in the
United States, other countries, or both.
• Windows is either a registered trademark or a trademark of Microsoft
Corporation in the United States and/or other countries.
• Intel and Pentium are trademarks or registered trademarks of Intel Corporation
or its subsidiaries in the United States and other countries.
Insert the included CD-ROM into your PC
1
and double-click the "My Computer" icon on
the screen. A window appears displaying
several different icons.
Double-click the CD-ROM icon in "My
2
Computer". The following window should
appear.
Click the "Install" button and you should see
3
the following screen. Check "Downloader for
SHARP Electronic Organizer."
®
98 or Windows
®
®
2000
Install the Downloader
(Double-Click!)
(Double-Click!)
(Click!)
(Check!)
Connecting Your Organizer to Your PC
1. First turn off your PC and organizer before
connecting or disconnecting the Docking Module.
2. Connect the standard 9-pin connector of the
Docking Module to one of the COM Ports on
your PC.
3. Connect the other end on the Docking Module
to the 4-pin cable jack of your organizer.
2
(To Your PC)
Click the "Next" button to prepare for "Setup".
4
When "Setup" starts, the following window
will appear.
Follow the installation instructions then
5
install the downloader.
After installing, select the COM port that you
6
wish to use. Click the "Next" button, then
finish the installation.
3
(To Your Organizer)
(Click!)
(Click!)
(Click!)
(Click!)
(Select!)
(Click!)
(Click!)
2
Advertisement
