Setting/What it does
Adjusts the surround sound balance from
front to back, making the sound more distant
(minus settings), or more forward (positive
Extends the front stereo image to include
surround speakers for a 'wraparound' effect.
C.IMG (Center Image)
(Applicable only when using a center speaker)
Adjust the center image to create a wider
stereo effect with vocals. Adjust the effect
from 0 (all center channel sent to front right
and left speakers) to 10 (center channel sent
to the center speaker only).
H.GAIN (Height Gain)
Adjusts the output from the front height
speaker when listening in DOLBY PLIIz
HEIGHT mode. If set to H, the sound from the
top will be more emphasized.
You can change the MIDNIGHT/LOUDNESS options at any
time by using
You can change the Sound Retriever feature at any time by
This setting works only with dual mono encoded Dolby Digital
and DTS soundtracks.
The initial set AUTO is only available for Dolby TrueHD signals.
Select MAX or MID for signals other than Dolby TrueHD.
You shouldn't have any problems using this with most SACD
discs, but if the sound distorts, it is best to switch the gain
setting back to 0 dB.
This feature is only available when the connected display
supports the automatic audio/video synchronizing capability
('lip-sync') for HDMI. If you find the automatically set delay time
unsuitable, set A.DLY to OFF and adjust the delay time
manually. For more details about the lip-sync feature of your
display, contact the manufacturer directly.
Only available with 2-channel sources in DOLBY PLII MUSIC
Only when listening to 2-channel sources in NEO:6 CINEMA
and NEO:6 MUSIC mode.
–3 to +3
0 to 10
Listening to your system