Analog audio cables
Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and
you should connect the red plugs to R (right) terminals and
white plugs to L (left) terminals.
A U D
Digital audio cables
Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
C O A
X I A
O P T
When connecting optical cables, be careful when inserting
the plug not to damage the shutter protecting the optical
When storing optical cable, coil loosely. The cable may be
damaged if bent around sharp corners.
You can also use a standard RCA video cable for coaxial
Standard RCA video cables
These cables are the most common type of video connection
and are used to connect to the composite video terminals. The
yellow plugs distinguish them from cables for audio.
I C A
About video outputs connection
This receiver is not loaded with a video converter. When you
use HDMI cables for connecting to the input device, the same
cables should be used for connecting to the TV.
The signals input from the analog (composite) video inputs of
this unit will not be output from the HDMI OUT.
V I D
Connecting your equipment
Terminal for connection with
Terminal for connection
with TV monitor
The OSD will
Video signals can be output.