Connecting The Satellite (Front, Center, Surround) Speakers - JVC RX-THSW8 Instructions Manual

Connections
Connecting the satellite (front, center, surround)
speakers
Before connecting the speaker
cords;
Twist and pull the insulation coat off and
remove.
Powered subwoofer
SP-PWSW9
Surround speakers
SP-THS9S
CAUTION
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
Front speakers
SP-THS9F
4 m
4 m
Wired connection
When you perform Smart
Surround Setup function
(A pg. 20), connect the
surround speakers to the
powered subwoofer, not to the
wireless receiver unit.
Center speaker
SP-THS9C
Speaker cord (supplied)
• Connect the silver cords to the black (r) terminals.
• Connect the copper cords to the (q) terminals referring
to the table below:
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
10 m
This page is for
Red
Black
Silver
Copper
White
Red
Green
Blue
Gray
Wireless receiver
unit RX-THSW8
Continued on next page
10