RSV 1000 R - RSV 1000 R FACTORY
•
Working from the right side, fit the lower shock ab-
sorber screw.
•
Tighten down the nut from the opposite side.
•
Working from the right side, fit the double connecting
link / swinging arm screw.
•
Tighten down the nut from the opposite side.
•
Fit the mount plate complete with brake caliper and
speed sensor.
•
Tighten down the three screws securing the cover
complete with washers.
•
Fit the pinion cover and tighten down its three screws
•
Refit the rear wheel and exhaust assembly.
•
Adjust the tension of the transmission chain.
CYCLE PARTS
5 - 91