Disassembling The Rear Suspension Linkage - APRILIA RSV 1000 R FACTORY Workshop Manual

CYCLE PARTS
5.4.5. DISASSEMBLING THE REAR SUSPENSION
LINKAGE
•
Working from the right-hand side of the vehicle, loosen
and remove the nut (1).
•
Pull the screw (2) out from the opposite side.
•
Loosen and remove the nut (3).
•
Pull the screw (4) out from the opposite side.
•
Loosen and remove the nut (5).
•
Pull the screw (6) out from the opposite side.
•
Remove the whole suspension linkage unit (7).
NOTE When reassembling, grease the linkage fulcrum
points, and be extremely careful to refit the components cor-
rectly, making sure that the joints move smoothly.
5 - 82
RSV 1000 R - RSV 1000 R FACTORY