Mitsubishi Electric Mr.SLIM PUHZ-RP1.6VHA Technical & Service Manual page 106

Split-type, heat pump air conditioners
Hide thumbs Also See for Mr.SLIM PUHZ-RP1.6VHA:
Table of Contents

Advertisement

OPERATING PROCEDURE
13. Removing the reactors (ACL1, ACL2, ACL3)
(1) Remove the service panel. (See figure 1.)
(2) Remove the top panel. (See figure 1.)
(3) Remove the 6 screws, screw 8 and 9 (5
the front panel and remove the front panel. (See photo 3.)
(4) Remove the 2 screws, screw
that fix the separator, screw 0 from the valve bed and
screw 1 from the bottom of the separator, and tilt the
separator to the side of the fan motor slightly.
(See photo 17.)
(5) Disconnect the lead wires from the reactor and remove the
4 screws, screw 2, that fix the reactor to remove the
reactor. (See photo 18 and 19.)
Note 1: The reactor is very heavy (4kg)! Be careful when
handling it.
Note 2: The reactor box is also removable.
Photo 18
Propeller
Reactors
10), that fix
0 and 1 (both 4
10),
Reactor box
Electrical
parts box
Four-way
valve
Reactor box
Photo 17
Reactor box
Photo 19
Screw2
106
PHOTOS
Electrical parts box
Screw1
Separator
Screw0
Valve
bed

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents