Do Not Disturb; Single Number Reach And Move To Mobile - Cisco VoIP 8961 Reference Manual

Step 5
If adding a new number, enter the 4 digit extension to
forward internally. To forward to an external phone
number, enter 9, then the full 10 digit telephone
number.
Click the Save button to save your changes.
NOTE: Call forwarding can also be enabled by pressing
the Forward All soft key button on your phone or
through your Jabber client.

Do Not Disturb

Step 1
From the Cisco Self Care Portal page, select IM &
Availability from the top toolbar.
Step 2
Under the Do Not Disturb heading, check the box to
"Turn on" Do Not Disturb.
Step 3
Click the Save button to save your changes.
To disable Do Not Disturb, uncheck the box, then click
the Save button to save your changes.
NOTE: Do Not Disturb can also be enabled by pressing
the line button to the left of Do Not Disturb on your
phone.

Single Number Reach and Move to Mobile

Single Number Reach (SNR) allows incoming calls to ring an alternate phone, like a mobile phone, in
addition to your primary desk phone. Move to Mobile can also be enabled, in addition to SNR, allowing
you to quickly transfer an active phone call from your desk phone to your mobile phone. Single Number
Reach and Move to Mobile are custom, add-on, features that are not enabled by default and require
consultation with ICIT staff. To request access to this feature, contact the ICIT TSC Helpdesk at 472-4357
or helpdesk@uww.edu.
26