Page of 240

Advertisement

Foreword
Welcome to the growing family of new NISSAN owners. This vehicle has been delivered to you with confidence. It has been produced using the latest techniques
and strict quality control.
This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many kilometers (miles) of driving
pleasure. Please read through this manual before operating your vehicle.
A separate Warranty Information & Maintenance Booklet explains details about the warranties covering your vehicle.
A NISSAN dealer knows your vehicle best. When you require any service or have any questions, we will be glad to assist you with the extensive resources
available for you.
IMPORTANT SAFETY INFORMATION
REMINDERS FOR SAFETY!
Follow these important driving rules to help ensure a safe and complete trip
for you and your passengers!
NEVER drive under the influence of alcohol or drugs.
ALWAYS observe posted speed limits and never drive too fast
for conditions.
ALWAYS use your seat belts and appropriate child restraint
systems. Preteen children should be seated in the rear seat.
ALWAYS provide information about the proper use of vehicle
safety features to all occupants of the vehicle.
ALWAYS review this Owner's Manual for important safety
information.
WHEN READING THE MANUAL
This manual includes information for all options available on this model.
Therefore, you may find some information that does not apply to your
vehicle.
All information, specifications and illustrations in this manual are those in
effect at the time of printing. NISSAN reserves the right to change
specifications or designs without notice and without obligation.
MODIFICATION OF YOUR VEHICLE
This vehicle should not be modified. Modification could affect its
performance, safety or durability, and may even violate governmental
regulations. In addition, damage or performance problems resulting from
modifications may not be covered under NISSAN warranties.
READ FIRST — THEN DRIVE SAFELY
Before driving your vehicle, read this Owner's Manual carefully. This will
ensure familiarity with controls and maintenance requirements, assisting
you in the safe operation of your vehicle.
Throughout this manual we have used the symbol
word WARNING. This is used to indicate the presence of a hazard that
could cause death or serious personal injury. To avoid or reduce the risk,
the procedures must be followed precisely.
The symbol
followed by the word CAUTION is also used through-
out this manual to indicate the presence of a hazard that could cause minor
or moderate personal injury or damages to your vehicle. To avoid or reduce
the risk, the procedures must be followed carefully.
followed by the

Advertisement

   Also See for Nissan Navara

   Summary of Contents for Nissan Navara

  • Page 1

    A separate Warranty Information & Maintenance Booklet explains details about the warranties covering your vehicle. A NISSAN dealer knows your vehicle best. When you require any service or have any questions, we will be glad to assist you with the extensive resources available for you.

  • Page 2

    Arrows in an illustration that are similar to these indicate movement or action. Arrows in an illustration that are similar to these call attention to an item in the illustration. © 2013 NISSAN MOTOR (THAILAND) CO., LTD.

  • Page 3

    Table of Illustrated table of contents contents Safety — seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Heater and air conditioner, and audio system Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself Technical information Index...

  • Page 5: Illustrated Table Of Contents

    0 Illustrated table of contents Seats, seat belts and Supplemental Restraint Right-Hand Drive (RHD) model ........0-7 System (SRS) ................. 0-2 Engine compartment .............. 0-8 Exterior front ................0-3 YD25DDTi engine model (LHD model) ......0-8 Exterior rear ................0-4 YD25DDTi engine model (RHD model) ......

  • Page 6: Seats/belts And Supplemental Restraint System, Left-hand Drive Double Cab Model, System (srs)

    SEATS, SEAT BELTS AND SUPPLEMENTAL RESTRAINT SYSTEM (SRS) SSI0280 Left-hand drive (LHD) Double Cab model 1. Rear seats (folding)* (Double Cab model) (P. 6-3) Jump seat* (King Cab model) (P. 1-4) 2. Head restraints (P. 1-4) 3. Front seats (P. 1-2) 4.

  • Page 7: Double Cab Model Exterior Front, Exterior Front

    EXTERIOR FRONT JVC0446X Double Cab model 1. Hood (P. 3-9) 7. Fog lights* (P. 2-20) 11. Outside rearview mirrors (P. 3-12) 2. Windshield wiper and washer 8. Headlights and turn signals 12. Doors — Wiper and washer switch (P. 2-21) —...

  • Page 8: Exterior Rear

    EXTERIOR REAR JVC0447X Double Cab model 1. High-mounted stop light* 5. Fuel filler lid — Bulb replacement (P.8-27) — Operation (P. 3-10) 2. Rear window — Fuel recommendation (P. 9-4) — Defogger switch* (P.2-22) 6. Rear combination light (Bulb replacement) 3.

  • Page 9: Left-hand Drive Double Cab Passenger Compartment, Passenger Compartment

    PASSENGER COMPARTMENT JVC0456X Left-hand drive (LHD) Double Cab model 1. Microphone* 7. Console box* (P. 2-26) — Bluetooth Hands-Free phone system (P.4-27) 8. Front cup holders* and ashtray* (P. 2-27) 2. Map lights* (P. 2-29) 3. Sun visors (P. 2-28) *: if equipped 4.

  • Page 10: Left-hand Drive Model Instrument Panel, Instrument Panel

    INSTRUMENT PANEL 10. Air conditioner control (P. 4-2) 11. Front passenger supplemental front-impact air bag* (P. 1-26) 12. Diesel Particulate Filter (DPF) regeneration switch* (P.5-6) 13. Headlight aiming control switch* (P. 2-19) 14. Hood release switch (P. 3-9) 15. Outside rearview mirror control switch* (P. 3-12) 16.

  • Page 11: Right-hand Drive Model Instrument Panel, Right-hand Drive (rhd) Model

    INSTRUMENT PANEL 10. Headlight, fog light* and turn signal switch (P. 2-18) or Wiper and washer switch (P.2-21) 11. Side ventilator (P. 4-2) 12. Glove box (P. 2-26) 13. Ashtray* (P. 2-25) or Rear differential locking switch* (P.5-25) 14. 4WD shift switch* (P. 5-20) 15.

  • Page 12: Engine Compartment

    ENGINE COMPARTMENT SSI0442 Left-hand drive (LHD) model (with engine cover*) YD25DDTi ENGINE MODEL (LHD model) 1. Window washer fluid reservoir (P. 8-18) 8. Engine coolant reservoir (P. 8-8) 2. Fuse/fusible link holder (P. 8-26) 9. Battery (P. 8-19) 3. Engine oil dipstick (P. 8-9) 10.

  • Page 13: Yd25ddti Engine Model (rhd Model)

    SSI0443 Right-hand drive (RHD) model (with engine cover*) YD25DDTi ENGINE MODEL (RHD model) 1. Window washer fluid reservoir (P. 8-18) 8. Engine coolant reservoir (P. 8-8) 2. Fuse/fusible link holder (P. 8-26) 9. Battery (P. 8-19) 3. Brake and clutch fluid reservoir* (P. 8-17) 10.

  • Page 14: Qr25de Engine Model

    SSI0335 Left-hand drive (LHD) model QR25DE ENGINE MODEL 1. Window washer fluid reservoir (P. 8-18) 8. Radiator cap (P. 8-8) 2. Fuse/fusible link box (P. 8-26) 9. Power steering fluid reservoir (P. 8-16) 3. Air cleaner (P. 8-23) 10. Battery (P. 8-19) 4.

  • Page 15: Restraint System

    1 Safety — seats, seat belts and supplemental restraint system Seats..................Seat belt maintenance............1-12 Front seats................Child restraints (for Australia)..........1-13 Jump seat (King Cab model)..........Child restraints (except for Australia)......... 1-13 Head restraints..............Precautions on child restraints usage ......1-13 Seat belts..................

  • Page 16

    SEATS FRONT SEATS WARNING: Do not adjust the driver’s seat while driving so that full attention may be given to vehicle operation. Manual seat adjustment WARNING: ● After adjusting a seat, gently shake the seat to confirm that the seat is locked SSS0133A securely.

  • Page 17

    2. Tilt the seat back to the desired position. 3. Release the adjusting lever to lock the seat back in position. The reclining feature allows the adjustment of the seat back for occupants of different sizes to help obtain the proper seat belt fit. (See “SEAT BELTS” later in this section.) The seat back may be reclined to allow occupants to rest when the vehicle is parked.

  • Page 18

    SSS0741 SSS0890 SSS0287 Driver’s seat JUMP SEAT (King Cab model) HEAD RESTRAINTS Seat lifter (if equipped): Turn the dial to adjust the height of the seat WARNING: WARNING: cushion to the desired position. ● Do not use the jump seat for child Do not drive and/or ride in the vehicle with restraint installation.

  • Page 19

    NISSAN strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes the supplemental air bag.

  • Page 20

    SSS0014 SSS0134A SSS0016 SSS0136A Safety - seats, seat belts and supplemental restraint system...

  • Page 21

    Never carry more people in the vehicle being adjusted to remove slack. tensioner seat belt system components than there are seat belts. should be done by a NISSAN dealer. ● Care should be taken to avoid contami- ● Never wear seat belts inside out. Belts nation of the webbing with polishes, oils should not be worn with straps twisted.

  • Page 22

    Children need adults to help protect them. They protection. need to be properly restrained. The proper NISSAN recommends that infants and small children be seated in a child restraint system. PREGNANT WOMEN restraint depends on the child’s size.

  • Page 23

    pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulled from its fully retracted position, firmly pull the belt and release it. Then smoothly pull the belt out of the retractor.

  • Page 24

    Shoulder belt height adjustment (if equipped) WARNING: The shoulder belt anchor height should ● be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident.

  • Page 25

    WARNING: If the retractor does not lock during this check, contact a NISSAN dealer immediately. The seat back should not be in a reclined position any more than needed for com- fort. Seat belts are most effective when the passenger sits well back and straight up in the seat.

  • Page 26

    SEAT BELT MAINTENANCE Periodically check that the seat belt and all the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the seat belt webbing is found, the entire seat belt assembly should be replaced.

  • Page 27

    ● Infants and small children should never ● NISSAN recommends that the child be carried on your lap. It is not possible restraint system be installed on the rear for even the strongest adult to resist the seat.

  • Page 28

    The child restraint system should not NISSAN recommends that infants and small ● It may not be possible to properly install move more than 25 mm (1 in) . If the children be seated in a child restraint system.

  • Page 29

    SSS0512 SSS0498A SSS0513 Rear center seat Rear outboard seats Locking clip 3. To prevent slack in the seat belt, it is Front-facing: necessary to secure the lap/shoulder belt in place with a locking clip Ⓐ . Use the locking When you install a front-facing child restraint system on a rear outboard or center seat, follow clip attached to the child restraint system, or one which is equivalent in dimensions and...

  • Page 30

    SSS0514 SSS0497 SSS0513 Rear center seat Rear outboard seats Locking clip 3. To prevent slack in the seat belt, it is Rear-facing: necessary to secure the lap/shoulder belt in place with a locking clip Ⓐ. Use the locking When you install a rear-facing child restraint clip attached to the child restraint system, or system on a rear outboard or center seat, follow one which is equivalent in dimensions and...

  • Page 31

    SSS0627 SSS0300A Installation on front seat - with front passenger air Front-facing: ● NISSAN recommends that child restraint system be installed on the rear If you must install a front-facing child restraint seat. However, if you must install a front-...

  • Page 32

    Installation on front seat - without front passenger air bag WARNING: NISSAN recommends that a child restraint system be installed on the rear seat. However, if you must install a child restraint system in the front passenger’s seat, move the passenger’s seat to the rearmost position.

  • Page 33

    SSS0627 SPA1706B SSS0513 Rear-facing: 5. To prevent slack in the lap belt, it is necessary to secure the lap/shoulder belt in place with a locking clip Ⓐ . Use the If you must install a rear-facing child restraint 4. Route the seat belt tongue through the child locking clip attached to the child restraint system on the front seat, follow these steps: restraint system and insert it into the buckle...

  • Page 34

    SSS0627 SSS0515 SSS0513 5. To prevent slack in the lap belt, it is Front-facing: necessary to secure the lap/shoulder belt in place with a locking clip Ⓐ. Use the If you must install a rear-facing child restraint 4. Route the seat belt tongue through the child locking clip attached to the child restraint system on the front seat, follow these steps: restraint system and insert it into the buckle...

  • Page 35

    SUPPLEMENTAL RESTRAINT help protect the occupants. The force of the air bags inflating can increase the risk of injury if the SYSTEM (SRS) (if equipped) occupants are too close to, or are against, the air bag modules during inflation. PRECAUTIONS ON SUPPLEMENTAL The air bags will deflate quickly after deployment.

  • Page 36

    WARNING: ● The supplemental front-impact air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear the seat belts to help reduce the risk or severity of injury in accidents. ●...

  • Page 37

    SSS0006 SSS0008 SSS0099 SSS0007 SSS0009 SSS0100 1-23 Safety - seats, seat belts and supplemental restraint system...

  • Page 38

    Air bag warning labels (if equipped) WARNING: Warning labels about the supplemental air bag system are placed in the vehicle as shown in the Never let children ride unrestrained or illustration. ● extend their hands or face out of the window.

  • Page 39

    Under thes e c o ndit io ns, th e a ir b ag or pre-tensioner seat belt systems may not operate properly. They must be checked and repaired. Contact a NISSAN dealer immediately. SPA1097 SRS air bag warning light...

  • Page 40

    SUPPLEMENTAL AIR BAG SYSTEMS WARNING: Do not place any objects on the steer- ● ing wheel pad, on the instrument panel, and near the front door finishers and the front seats. Do not place any objects between any occupants and the steering wheel pad, on the instrument panel, and near the front door finishers and the front seats.

  • Page 41

    Tampering includes changes NISSAN dealer. The SRS wiring should to the steering wheel and the instrument modified disconnected. The supplemental front-impact air bag system is panel by placing materials over the...

  • Page 42

    ● The air bag systems should be in spected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. If you need to dispose of the SRS or ●...

  • Page 43: Instruments And Controls

    2 Instruments and controls Instrument panel................ . 2-2 Headlight switch..............2-18 Left-Hand Drive (LHD) model..........2-2 Headlight aiming control switch (if equipped)....2-19 Right-Hand Drive (RHD) model......... 2-3 Turn signal switch..............2-20 Meters and gauges..............2-4 Fog light switch.................

  • Page 44

    INSTRUMENT PANEL 11. Front passenger supplemental front-impact air bag* 12. Diesel Particulate Filter (DPF) regeneration switch* 13. Headlight aiming control switch* 14. Hood release switch 15. Outside rearview mirror control switch* 16. Fuel filler lid opener* 17. Tilting steering wheel lock lever* 18.

  • Page 45

    INSTRUMENT PANEL — Cruise control switches* 10. Headlight, fog light* and turn signal switch or Wiper and washer switch 11. Side ventilator 12. Glove box 13. Ashtray* or Rear differential locking switch* 14. 4WD shift switch* 15. Cigarette lighter* /Power outlet 16.

  • Page 46

    METERS AND GAUGES NIC1025 SPEEDOMETER AND ODOMETER Speedometer ① indicates the vehicle The speedometer speed (km/h). Scale resolution on the meter varies with models. Odometer/twin trip odometer SIC3340 The odometer records the total distance the vehicle has been driven. 1. Warning/indicator lights 8 .

  • Page 47

    (if equipped) The distance to empty includes a low range TRIP COMPUTER warning feature: when the fuel level is low, the distance to empty is automatically selected and the digits blink in order to draw the driver’s attention. Press the trip odometer reset knob if you wish to return to the mode that was selected before the warning occurred.

  • Page 48

    average speed can be reset by pressing the ENGINE OIL LEVEL INFORMATION (if equipped) action. (See “CHANGING ENGINE OIL” in the “8. Maintenance and do-it-yourself” section for the trip odometer reset knob for more than proper oil change procedure.) approximately 1 second. Trip computer reset Oil change schedule set-up Pushing the trip odometer reset knob...

  • Page 49

    CAUTION : Do not perform the reset operation unless Contact a NISSAN dealer, or see “Changing the engine oil has been changed. engine oil and oil filter” in the “8. Maintenance and After changing the engine oil, the oil change do-it-yourself”...

  • Page 50

    Adjusting the time The gauge indicates the engine coolant tem- perature. The engine coolant temperature should remain within the normal range ① . Turn the adjustment knob ② counterclockwise to advance the hour. The engine coolant temperature varies with the outside air temperature and driving conditions.

  • Page 51

    COMPASS DISPLAY (if equipped) COMPASS OPERATION To operate the compass, proceed as follows: 1. Push and release the switch ① in less than 3 seconds to toggle the directional heading display ON and OFF. 2. If the display ② reads “C”, calibrate the compass by driving the vehicle in a complete circle (360º) at 8 km/h (5 MPH) or less until the display reads a direction.

  • Page 52

    Zone map 2-10 Instruments and Controls...

  • Page 53

    1. With the directional heading display turned by a NISSAN dealer. on, push the switch ① for 6 seconds, until the ● The compass may not indicate the zone selection information appears (a number...

  • Page 54

    Turn the transfer shift dial into the 2H, 4H or 4L the parking brake not applied, stop the vehicle and electrical system. Have the system checked, position when the automatic transmission park perform the following: and repaired promptly by a NISSAN dealer. warning light comes on. 2-12 Instruments and Controls...

  • Page 55

    Engine oil pressure/level warning light 2. If the brake fluid level is correct, have the The light reminds the driver to fasten his/her seat warning system checked by a NISSAN dealer. belt. The light comes on whenever the ignition Engine oil pressure warning: switch is turned to the ON position.

  • Page 56: Anti-lock Braking System

    (if equipped) If the warning light is still on after the above When the ignition switch is in the ON position, the operation, have the system checked by a NISSAN Diesel Particulate Filter (DPF) warning light dealer as soon as possible.

  • Page 57: Indicator Lights

    Have your vehicle ● Cruise control on indicator light (if Continuing vehicle operation without inspected by a NISSAN dealer. equipped) proper servicing of the engine control The light illuminates when the main switch is...

  • Page 58

    If the vehicle is driven under extreme conditions, detected. Have the vehicle inspected by a operational. such as excessive wheel spinning and sub- NISSAN dealer. You do not need to have your For Thailand: vehicle towed to the dealer. sequent hard braking, the Fail-safe system may be If the MIL illuminates while the engine is running, it activated.

  • Page 59: Pre-driving Checks And Adjustments

    Have the system checked, pedal is depressed. while the ignition switch is in the “ON” position. and if necessary repaired, by a NISSAN dealer (See “SECURITY SYSTEM” in the “3. Pre-driving promptly. Have the system checked, and if necessary checks and adjustments”...

  • Page 60

    HEADLIGHT AND TURN SIGNAL SWITCH NISSAN recommends you to consult the local regulations concerning the use of lights. HEADLIGHT SWITCH Lighting Turn the switch to the position: ① The clearance, tail, number plate and instrument lights will come on. Turn the switch to the...

  • Page 61

    Headlight beam select Switch Number of Weight of position front seat oc- load in bed ① To select the high beam when in the cupants position, push the lever forward. The high beam Driver No load lights come on and the indicator light illuminates.

  • Page 62

    FOG LIGHT SWITCH FRONT FOG LIGHT (if equipped) TURN SIGNAL SWITCH Turn the headlight switch to the position. Direction indicator Turn the fog light switch to the position ①. The front fog lights will come on as well ① Move the lever up or down to signal the turning direction.

  • Page 63

    WIPER AND WASHER SWITCH To turn the rear fog light on: The windshield wiper and washer can be operated when the ignition switch is in the ON 1. Turn the headlight switch to the position. position. 2. Turn the fog light switch to the position Push the lever down to operate the wiper at the ②...

  • Page 64

    DEFOGGER SWITCH (if equipped) HAZARD INDICATOR FLASHER HORN SWITCH SIC3791 SIC2574 SIC2858 To defog the rear window, start the engine and Push the switch on to warn other drivers To sound the horn, push the center pad area of the push the switch ①...

  • Page 65

    WINDOWS POWER WINDOWS (if equipped) WARNING: ● Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch (if equipped) to prevent unexpected power windows.

  • Page 66

    POWER OUTLET ● When not in use, be sure that the cap is closed. Do not allow water to contact the outlet. ● Before inserting or disconnecting a plug, be sure to turn off the power switch of the electrical accessory being used or the ACC power of the vehicle.

  • Page 67

    ASHTRAYS AND CIGARETTE LIGHTER Front ashtray (if equipped) Type A To open the ashtray, pull the lid ①. To take out the ashtray, pull out ②. Type B To open the ashtray, pull the lid. To take out the ashtray, push the lever Ⓐ and pull out.

  • Page 68

    To heat the cigarette lighter, push in until it latches. When the lighter is heated, it will spring out automatically. Return the cigarette lighter to its original position after use. SIC3358 NIC938 CONSOLE BOX (if equipped) GLOVE BOX To open the top portion of the glove box, push WARNING: the latch Ⓐ...

  • Page 69

    CUP HOLDER WARNING: The cup holder should not be used while driving so that full attention may be given to vehicle operation. CAUTION: ● Avoid abrupt starting braking when the cup holder is being used to prevent spillage. If the liquid is hot, it can scald you or your passenger.

  • Page 70

    SUN VISORS INTERIOR LIGHTS ROOF RACK (Double Cab models - if equipped) NIC960 Type A (if equipped) JVI0663X Always evenly distribute the cargo on the tubular roof rack. The maximum total load is 56 kg (125 lb) evenly distributed. WARNING: Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting.

  • Page 71

    ROOM LIGHT The room light has a three-position switch. ① The light remains ON when the switch is in the ON position. ② When the switch is in the center “ ” position, the light will illuminate when a door is opened. The light turns off after approximately 15 seconds when all doors are closed.

  • Page 72

    MEMO 2-30 Instruments and Controls...

  • Page 73

    3 Pre-driving checks and adjustments Keys....................NISSAN Anti-Theft System (NATS)........NISSAN Anti-Theft System (NATS) key Hood....................(if equipped)................ Fuel filler lid.................. 3-10 Door locks................... Steering wheel................3-10 Locking with key..............Steering wheel adjustment (if equipped)...... 3-10 Locking with inside lock knob.........

  • Page 74

    ● plicates by using the key number. Always look before opening any doors, to avoid an accident with oncoming NISSAN does not record key numbers so it is very traffic. ● important to keep track of your key number plate.

  • Page 75

    NPA585 SSS0717 SPA2183 Inside lock Example — Driver’s side switch (LHD model) LOCKING WITH KEY LOCKING WITH INSIDE LOCK KNOB LOCKING WITH POWER DOOR LOCK SWITCH Manual (if equipped) To lock all the doors ①, turn the driver’s door key To lock the door without the key, move the inside towards the front of the vehicle lock knob to the lock position ①...

  • Page 76

    Type A: When the key is in the ignition switch and the driv- er’s door is open. Type B: When the key is in the ignition switch and any door is open. SSS0718 SSS0719 REAR ACCESS DOORS (King Cab model) 2.

  • Page 77

    As many as 5 remote controllers can be used with one vehicle. For information about the purchase and use of additional remote controllers, contact a NISSAN dealer. The remote controller will not function under the following conditions: SSS0720 NPA569 ●...

  • Page 78

    60˚C (140˚F). 2. Close all doors. 3. Push the “LOCK” button on the remote If a remote controller is lost or stolen, NISSAN controller. recommends erasing the ID code of that remote 4. The hazard indicator light flashes once.

  • Page 79

    Theft warning system If you are near your vehicle and feel threatened, ● NISSAN Anti-Theft System (NATS) you may activate the panic alarm to call attention by pushing and holding the “PANIC” The security condition will be shown by the button on the remote controller for longer than security indicator light.

  • Page 80

    If the system does not operate as described NISSAN recommends placing the registered ignition switch is turned to the “ACC” or “ON” above, have it checked by a NISSAN dealer. NATS key separate from other devices to avoid position, the system will not activate.

  • Page 81

    20 to 30 cm If the light remains on and/or the engine (8 to 12 in) above the hood lock, then let it does not start, contact a NISSAN dealer for drop. NATS service as soon as possible. Be sure 5.

  • Page 82

    (Type A) , or insert the key into the key cylinder on ● Use only a NISSAN fuel filler cap or the fuel filler lid and turn the key toward the front of exact equivalent as a replacement. It has the vehicle (Type B) .

  • Page 83

    MIRRORS WARNING: Adjust the position of all mirrors before driving. Do not adjust the mirror positions while driving so that full attention may be given to vehicle operation. SPA2343 SPA2143 INSIDE REARVIEW MIRROR Manual anti-glare type Pull the adjusting lever ① when the glare from the While holding the inside rearview mirror, adjust headlights of the vehicle behind you obstructs your the mirror angles until the desired position is...

  • Page 84

    Do not hang any objects on the mirror or ap- ply glass cleaner. Doing so will reduce the sensitivity of the sensor , resulting in im- proper operation. OUTSIDE REARVIEW MIRRORS WARNING: ● Never touch the outside rearview mirrors while they are in motion. Doing so may pinch your fingers or damage the mirror.

  • Page 85

    SPA0607 SPA2140 SPA0701 Manual control type: Folding VANITY MIRROR (if equipped) Push on the mirror surface directly to adjust it to Fold the outside rearview mirror by pushing it To use the front vanity mirror, pull down the sun the desired position. towards the rear of the vehicle.

  • Page 86

    TRUCK BOX PARKING BRAKE WARNING: ● Never drive the vehicle with the parking brake applied. The brake will overheat and fail to operate and will lead to an accident. ● Never release the parking brake from outside the vehicle. If the vehicle moves, it will be impossible to push the foot brake pedal and will lead to an accident.

  • Page 87

    TAILGATE LOCK/UNLOCK WITH KEY (if equipped) NPA655 TIE DOWN HOOKS (if equipped) For your convenience, 4 tie down hooks are placed CAUTION: on the upper lorry inner sides. These may be used to help secure cargo loaded into the lorry bed. Do not drive the vehicle with the tailgate down.

  • Page 88

    ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. The UTILI-TRACK channel system allows you to move tie-down clamps in the bed to the best location to secure a load.

  • Page 89

    WTI0124 3. There should be no gap between the bottom. Securely tighten the centre bolt. LTI0104 2. Position the cleat so the nubs on the bottom fully seat into the channel detents. 3-17 Pre-driving checks and adjustments...

  • Page 90

    LTI0106 CAUTION: ● Install only one cleat per section of channel. ● Applying loads at an angle to the cleats that are greater than 45 degrees or loads greater than 90 kg (200 lbs) on side channels may cause damage to the channel or the bed.

  • Page 91

    LTI0123 1. correct installation, 2. incorrect installation WARNING: Do not install accessories over the between the front and rear side channels. Doing this could affect the rear structure certain rear impacts, which could result serious injury. 3-19 Pre-driving checks and adjustments...

  • Page 92

    MEMO 3-20 Pre-driving checks and adjustments...

  • Page 93: Heater And Air Conditioner, And Audio System

    4 Heater and air conditioner, and audio system Ventilators..................4 - 2 Audio system (if equipped)............4 - 8 Side and center ventilators..........4 - 2 Audio operation precautions..........4 - 8 Heater and air conditioner............4 - 2 Antenna................

  • Page 94

    Ventilators Heater and air conditioner JVH0501X SAA2138 SIDE AND CENTER VENTILATORS MANUAL AIR CONDITIONER (without heater) severe or possibly fatal injuries to peo- ple or animals. ● The ventilators can be opened or closed ① and 1. Fan speed control dial. Do not use the recirculation mode for the direction of the airflow can be adjusted ②.

  • Page 95

    Temperature control dial: Press the air recirculation button to the “ON” posi- the MAX A/C position. Turn the temperature control dial to set the desired tion in situations such as: driving on a dust raised air temperature from the ventilators and floor road, avoiding traffic fumes or having maximum NOTE: outlets.

  • Page 96

    speed, turn the fan speed control dial counter- clockwise. Temperature control dial: Turn the temperature control dial to set the desired air temperature from the ventilators and floor outlets. Air flow control dial: Use this dial to manually select the airflow from the air outlets as described below: MAX A/C Air flows from center and side...

  • Page 97

    4. Turn the temperature control dial to the 3. Turn the fan speed control dial to the desired Air recirculation button desired position between the middle and the position. maximum “HOT” (right) position. 4. Turn the temperature control dial to the Off position desired position between the middle and the ●...

  • Page 98

    3. Turn the fan speed control dial to the indicate a malfunction. button ( )to activate the air conditioner. desired position. When the air conditioner is on, cooling and 4. Turn the temperature control dial to the Dehumidified heating: dehumidifying functions will be added to the midpoint between “HOT”...

  • Page 99

    This may happen for example if the engine runs at idle OPERATING TIPS A NISSAN dealer or qualified workshop will speed for a long time on a hot day. be able to service your air conditioning system.

  • Page 100

    AUDIO SYSTEM (if equipped) AUDIO OPERATION PRECAUTIONS Cassette tape player ● To maintain good quality sound, NISSAN WARNING: recommends using cassette tapes of 60 Do not adjust the audio system while driving minutes or shorter in length. so that full attention may be given to vehicle operation.

  • Page 101

    Radio CAUTION: ● Radio reception is affected by station signal strength, distance from radio transmitter, ● Be sure to fold down the antenna buildings, bridges, mountains and other before the vehicle enters a garage with external influences. Intermittent changes in a low ceiling.

  • Page 102

    FM-AM RADIO WITH COMPACT DISC(CD) PLAYER Audio main operation The audio system operates when the ignition switch is in the “ACC” or “ON” position. POWER button: To turn on the audio system, push the PWR button. ● The system will turn on in the mode, (radio or CD) which was used immediately before the system was turned off.

  • Page 103

    “AM 531 kHz”. If you experience difficulties in changing radio (-) to decrease / (+) to increase specification, contact a NISSAN dealer. (-) to decrease / (+) to increase Clock display: (F) to front fade / (R) to rear fade To display the clock on the screen, perform the fol- lowing operations.

  • Page 104

    being played, the present track will start over button: from the beginning of the current track. Push the When the button is pushed while a CD is button several times to skip back tracks. The loaded, the CD will start playing automatically. CD will rewind the number of times the button is pushed.

  • Page 105

    RPT DISC: When the button is pushed twice, the CD All the tracks of the CD will be played continuously will be ejected further, and the CD can be removed RPT DISC → RPT TRACK in sequential order. The display indicates no with ease.

  • Page 106

    Radio memory button: To change the radio bands, push the button. The audio system can store up to 12 FM station frequencies (for FM1 and FM2) and 6 AM station AM → FM1 → FM2 frequencies. The FM stereo indicator, “ST” will display during To store the station frequency: FM stereo reception.

  • Page 107

    AUDIO CONTROL STEERING SWITCH MUTE button: (if equipped) Press the button to mute the sound. Press Tuning switch again to restore the sound. Tilt the Tuning switch to operate the radio or CD when they are being played. The func- tion varies depending on if you tilt the switch short- er (less than 1.5 seconds) or longer (more than 1.5 seconds) as follows.

  • Page 108

    FM-AM RADIO WITH COMPACT DISC (CD) CHANGER Audio main operation The audio system operates when the ignition switch is in the “ACC” or “ON” position. POWER button: To turn on the audio system, push the POWER button. ● The system will turn on in the mode, (radio or CD) which was used immediately before the system was turned off.

  • Page 109

    Clock adjustment: Push the button until the desired mode Pushing button will advance the time appears on the display. button will turn back the time. 6. Push the “MENU” button ② to finish the clock BASS → TREBLE → FADE → BALANCE → adjustment.

  • Page 110

    the CD changer will automatically select a slot CD EJECT button: which is available. 3. Insert a CD into the slot with the label side If a CD is ejected by pushing the button, and facing up. The CD will be guided automatically it is not taken out from the loading slot, the CD into the slot and will start playing.

  • Page 111

    RDM: All the tracks of the CD will be played conti- CD select buttons: nuously in random order . The display indicates To change to another CD already located in the “RDM”. CD changer, push the corresponding CD select button to. Scroll (SCRL) button: When the title is displayed but it is a long one, the button:...

  • Page 112

    1. Tune to the desired broadcasting station If you experience difficulties in changing radio frequency by using the TUNE/SEEK button. 2. Push and hold a memory button (1-6) until a specification, contact a NISSAN dealer. 4-20 Heater and air conditioner, and audio system...

  • Page 113

    LW-MW-FM RADIO WITH COMPACT DISC(CD) PLAYER SAA2379 MUTE button CD EJECT button POWER ON/OFF button SEEK/TRACK button Sound preference button MIX (Mix play) button FM band select button RPT (Repeat) button AM band select button VOLUME control/MENU select dial Radio memory buttons ENTER button CD button AUX IN (auxiliary input) jack...

  • Page 114

    Anti-theft system (if equipped) Clock adjustment BASS  TREBLE  BALANCE  FADER  EQ  BASS This unit can only be activated when the ignition switch for NATS is in the “ACC” or “ON” position. To adjust each audio setting, turn the MENU/VOL control dial clockwise or counterclockwise.

  • Page 115

    MIX DISC: TRACK UP/ DOWN button: All the tracks on the CD will be played in a NISSAN strongly recommends using a stereo mini When the button is pushed while a CD is random order. plug cable when connecting your music device...

  • Page 116: Lw-mw-fm Radio Operation

    The sound is muted until the auto store opera- or if the audio fuse blows, the radio memory CD EJECT button: tion is completed, upon which preset channel 1 is will be erased. In such a case, reset the When the button is pushed while a CD is automatically tuned in.

  • Page 117

    When EON data is being received, this enables station without switching to another local News mode automatic retuning of other preset stations on the station. For activation or deactivation details, When the NEWS button is pushed for longer than same network. Also, network linked services can see “MENU button”...

  • Page 118

    appropriate language setting. MENU button to exit the menu or wait at least for ● When the button is pushed during the 10 seconds without pressing any buttons. news interruption mode, the radio changes to ENGLISH DUTCH FRENCH the CD mode. However, the news standby SPANISH GERMAN ITALIAN...

  • Page 119

    Your NISSAN is equipped with the Bluetooth ® a tall building or in a mountainous Hands-Free Phone System. If you are an owner of area.

  • Page 120

    NOTE: you can talk on only one cellular phone at a time. 1. Push the PHONE SEND button until the You must push the button or the system announces “Pairing and connection button within 5 seconds change the language. menu”. 5.

  • Page 121

    Selecting a registered phone: NOTE: 1. Push the PHONE SEND button until the When you delete a phone, the associated 1. Push the PHONE SEND button until the system announces “Phonebook menu”. phonebook for the phone will also be system announces “Pairing and connection 2.

  • Page 122

    the name of the phonebook contacts. Select the Transferring a call: 2. Push the SEEK button. Each time contact you wish to call. the button is operated, the system announces During a call , push the PHONE SEND the name of the contacts. Select the contact 3.

  • Page 123: Starting And Driving

    5 Starting and driving Break-in schedule............... 5-2 Transfer case shifting procedures........5-17 Before starting engine............... 5-2 4WD mode switch operation.......... 5-20 Precautions when starting and driving........5-3 4WD mode indicator light..........5-21 Exhaust gas (carbon monoxide)........5-3 4WD warning light............. 5-22 Three-way catalyst (if equipped)........

  • Page 124

    Power steering system............. 5-34 Cold weather driving..............5-36 Brake system................5-34 Battery................... 5-36 Brake precautions.............. 5-34 Engine coolant..............5-36 Anti-lock Braking System (ABS) (if equipped)... 5-35 Tire equipment..............5-36 Special winter equipment..........5-37 Corrosion protection............5-37...

  • Page 125

    BREAK-IN SCHEDULE BEFORE STARTING ENGINE ● Fasten your seat belt and ask all passengers During the first 1,600 km (1,000 miles), follow WARNING: to do likewise. these recommendations for the future reliability The driving characteristics of your vehicle and economy of your new vehicle. Failure to follow ●...

  • Page 126

    “SEATS” in the “1. ● The exhaust system and body should be Safety — seats, seat belts and supple- inspected by a NISSAN dealer whenever: mental restraint system” section could result in serious personal injury in an CAUTION: —...

  • Page 127

    Have the vehicle in spected promptly by through the turbocharger system. A sudden inter- performing in a wide variety of on-pavement a NISSAN dealer. ruption to the oil supply may cause a malfunction in and off-road applications. This gives them a the turbocharger.

  • Page 128

    (P.9-2).) If an engine oil not RECOMMENDED FUEL/LUBRICANTS” in a specified by NISSAN is used, it could the “9. Technical information” section. The Diesel Particulate Filter (DPF) reduces the cause DPF malfunction or reduced fuel amount of materials that affect the environment by efficiency.

  • Page 129

    (PDF) warning light turns on, this may in- happens, perform the regeneration pro- dicate a system malfunction. Have your cess again. vehicle checked at a NISSAN dealer. ● If the Diesel Particulate Filter (DPF) regeneration switch indicator light con- JVS0245X...

  • Page 130

    Have your vehicle checked at a NISSAN dealer. LOADING LUGGAGE ● If the diesel particulate filter regenera-...

  • Page 131

    MANUAL TRANSMISSION When the key cannot be turned toward the LOCK This position turns on the ignition system and elec- To lock the steering wheel, turn the ignition switch position, proceed as follows to remove the key: trical accessories. to the LOCK position and remove the key from the 1.

  • Page 132: In Case Of Emergency

    Manual transmission (MT) model: Move the ● If it becomes necessary to start the en- gear lever to N (Neutral) position, and de- CAUTION: gine with a booster battery and jumper press the clutch pedal to the floor while start- ●...

  • Page 133: Driving With Manual Transmission

    DRIVING VEHICLE 2. Slowly depress the accelerator pedal, releas- DRIVING WITH MANUAL TRANSMISSION ing the clutch pedal and parking brake lever at CAUTION: the same time. ● Do not rest your foot on the clutch Shifting gear pedal while driving. This may cause To change gears, fully depress the clutch pedal, clutch damage.

  • Page 134

    Suggested maximum speed in each gear ● Two-Wheel Drive (2WD) model (Double Cab) ● Two-Wheel Drive (2WD) model (Double Downshift to a lower gear if the engine is not run- km/h (MPH) Cab) ning smoothly or if you need to accelerate. 37 (23) km/h (MPH) 64 (40)

  • Page 135

    ● Two-Wheel Drive (2WD) model and Four- Allowable maximum speed in each gear (YD25DDTi engine model, Euro 5): Wheel Drive (4WD) model (4H position, 205R16 tire) ● Four-Wheel Drive (4WD) model (4H position, km/h (MPH) 255/70R16 tire) 38 (23) km/h (MPH) 66 (41) 38 (23) 103 (64)

  • Page 136

    3 (Third gear) , 2 (Second gear) or 1 (Low gradually start the vehicle in motion by press- NISSAN dealer. gear) to move forwards and the R (Re- ing the accelerator pedal.

  • Page 137

    ● PARKING THE VEHICLE maximum safety, the foot brake pedal must be de- pressed before moving the selector lever into the P Depress the foot brake pedal and, once (Park) position. Use this position together with the the vehicle stops, move the selector le- parking brake.

  • Page 138

    ● 1 (Low gear): Four-Wheel Drive (4WD) model (4L posi- tion) Use this position when driving slowly on steep km/h (MPH) hills, slow driving through deep snow, sand or 9 (6) mud, or for maximum engine braking on steep 20 (12) downhill grades.

  • Page 139

    If there is any problem moving the lever out of the P (Park) position, have a NISSAN dealer to check the automatic transmission system as soon as pos- sible. 5-16 Starting and driving...

  • Page 140

    — If the warning light remains on after completing the above opera- tion, have your vehicle checked by a NISSAN dealer as soon as possi- ble. ● The transfer case may be damaged if you continue driving with the 4WD warning...

  • Page 141

    2WD or 4WD shift procedure: SSD0639 5-18 Starting and driving...

  • Page 142

    (AT model) or tem checked and serviced immediately by a the gear lever (MT model) is shifted from CAUTION: NISSAN dealer. the N (Neutral) position to any other gear To avoid vehicle damage: while the 4LO indicator light is blinking.

  • Page 143

    Set the 4WD mode switch to 4H or 4LO. may cause unnecessary noise and tire 4LO, depending on driving conditions. wear. NISSAN recommends driving in ● 2WD under these conditions. If it is difficult to free the vehicle, drive the ve- ●...

  • Page 144

    Use the engine brake by setting a low warning light comes on, have the system transmission gear (MT model: 2nd or 1st checked by a NISSAN dealer. gear. AT model: Select D2 or D1). ● Do not operate the 4WD mode switch NSD222 with the rear wheels spinning.

  • Page 145

    Depress the brake slowly during operation, have your vehi- pedal and move the selector lever to cle checked by a NISSAN dealer as soon the N (Neutral) position. Set the 4WD as possible. mode switch to 2WD.

  • Page 146

    With its higher centre of gravity control. your NISSAN is more affected by gusty side ● Many hills are too steep for any vehicle. If you ● winds. Slower speeds ensure better vehicle Do not drive beyond the performance of the drive up them, you may stall.

  • Page 147

    “locking” the two , and tread pattern on all four (4) wheels. NISSAN recommends that tires should be rotated rear drive wheels together, allowing them to turn at Failure to do so may result in a circumfer- every 5,000 km (3,000 miles).

  • Page 148

    REAR DIFFERENTIAL LOCKING SWITCH CRUISE CONTROL (if equipped) WARNING: ● Never leave the rear differential locking system in the “ON” position when driving WARNING: on paved or hard-surfaced roads. Avoid Do not use the cruise control when driving turning the steering wheel, doing so under the following conditions: could result in slipping the rear wheels ●...

  • Page 149

    To turn on cruise control, push the cruise con- To reset at a faster cruising speed, use one of trol ON/OFF main switch. The CRUISE indicator the following three methods: a) Depress the accelerator pedal. When the ve- light on the combination meter panel will come on. hicle reaches the desired speed, push and re- To set cruising speed, accelerate your vehicle to lease the COAST/SET switch.

  • Page 150

    PARKING NOTE: hicle could quickly become high enough WARNING: The vehicle speed will return to the last set to cause severe or possibly fatal illness ● Do not stop or park the vehicle over speed unless the cruise control ON/OFF to people and animals.

  • Page 151

    1. Firmly apply the parking brake. 2. Automatic Transmission (AT) model: Move the selector lever to the “P” (Park) position. Manual Transmission (MT) model: Move the shift lever to the “R” (Reverse) position. When parking on an uphill grade, move the shift lever to the “1” (1st) position.

  • Page 152

    Your driving style and speed must be adjusted not be exceeded. according to the circumstances. Before towing a trailer, see a NISSAN dealer for an explanation about the proper use of towing equipment. ● Have your vehicle serviced more often than at the intervals specified in a separate mainte-...

  • Page 153

    Towing loads greater than the tire placard). the value specified for your vehicle or using tow- ing equipment which is not provided by NISSAN SAFETY CHAINS could seriously affect the handling and/ or perfor- Always use a suitable chain between the vehi- mance of your vehicle.

  • Page 154

    TRAILER TOWING (except for Australia) Your new vehicle was designed to be used primar- ● When towing a trailer, the final drive gear oil TIRE PRESSURE ily to carry passengers and luggage. should be replaced periodically. When towing a trailer, inflate the vehicle tires to the maximum recommended COLD tire pressure, Remember that towing a trailer will place addition- ●...

  • Page 155

    ● If wheel or tires other than the NISSAN it in the luggage compartment or hide it out bushings and wheels are not NISSAN recommended ones are used, the VDC of sight.

  • Page 156

    The Vehicle Dynamic Control (VDC) system uses determine some action is required to help the The computer has a buit-in diagnostic feature that various sensors to monitor driver inputs and ve- vehicle on the steered path. test the system each time you start the engine and hicle motion.

  • Page 157

    POWER STEERING SYSTEM BRAKE SYSTEM VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH (if equipped) The power assisted steering is designed to use BRAKE PRECAUTIONS a hydraulic pump, driven by the engine, to assist Vacuum assisted brake steering. The brake booster aids braking by using engine- If the engine stops or if the drive belt breaks, you vacuum.

  • Page 158

    ANTI-LOCK BRAKING SYSTEM (ABS) (if equipped) downshift to a lower gear before going down a The Anti-lock Braking System (ABS) controls the slope or long downhill gradient. Overheated brakes so that the wheels do not lock during hard WARNING: brakes may reduce braking performance and braking or when braking abruptly on slippery sur- ●...

  • Page 159

    If you operate your vehicle on snowy or These may appear on an otherwise clear icy roads, NISSAN recommends the use of road in shaded areas. If a patch of ice is MUD & SNOW or ALL SEASON tires on all seen ahead, brake before driving on it.

  • Page 160: Appearance And Care

    For additional protection against rust and corro- dition, drive at a reduced speed, otherwise, sion, which may be required in some areas, consult your vehicle may be damaged and/or vehicle a NISSAN dealer. handling and performance may be adversely affected. SPECIAL WINTER EQUIPMENT...

  • Page 161

    MEMO 5-38 Starting and driving...

  • Page 162: In Case Of Emergency

    6 In case of emergency Flat tire................... 6-2 If your vehicle overheats............6-12 Stopping vehicle..............6-2 Towing your vehicle..............6-13 Blocking wheels..............6-2 Towing precautions............6-13 Getting tools and spare wheel...........6-3 Recommended towing for Two-Wheel Drive Removing the wheel.............6-6 (2WD) models..............6-13 Installing the wheel...............6-8 Recommended towing for Four-Wheel Drive Stowing the wheel and tools..........6-8 (4WD) models..............6-14...

  • Page 163

    FLAT TIRE In case of a flat tire, follow the instructions as de- 5. Shift the gear lever (M/T) into the R (Re- scribed below: verse) position [Automatic transmission, into the P (Park) position]. STOPPING VEHICLE 6. Turn off the engine. WARNING: ●...

  • Page 164

    SCE0669 SCE0670 SPA1858A King Cab model King Cab model Double Cab model GETTING TOOLS AND SPARE WHEEL 2. To loosen and remove the jack from its attach- For Single and Double Cab models ment, fit the flat end of the wheel nut wrench The tools and jack are located behind the front For King Cab model into the groove of the jack and turn counter-...

  • Page 165

    SCE0668 NCE163 NCE151 Single and Double Cab models Single and Double Cab models 2. Remove the tool bag then remove the tools 3. To loosen and to remove the jack from its For all models from the tool bag. attachment, fit the flat end of the wheel nut 1.

  • Page 166

    NCE152 SCE0377 5. Once the spare wheel is completely lowered, remove the jack rod and reach under the vehi- CAUTION: cle to remove the hanging plate. Do not insert the jack rod straight as it is de- signed to be inserted at an angle as shown. 6.

  • Page 167: Removing The Wheel, Jack-up Points

    your vehicle. The jack is designed only for lifting your vehicle during a tire change. ● Do not use the jack provided with your vehicle on other vehicles. ● Use the correct jacking points. Never use any other part of the vehicle for jack support.

  • Page 168

    1. Place the jack directly under the jack-up points as illustrated. The front jack-up points are indicated by the stamped arrow on the side of the frame. For the rear jack-up points, refer to the illustration or on the caution label attached to the jack body.

  • Page 169

    3. With the wheel nut wrench, tighten wheel nuts alternately and evenly in the sequence as illustrated (① - ) until they are tight. 4. Lower the vehicle slowly until the tire touches the ground. 5. Tighten the wheel nuts securely in the se- quence with the wheel nut wrench as illus- trated.

  • Page 170

    JUMP-STARTING WARNING: ● Incorrect jump-starting can lead to a battery explosion. The battery explo- sion may result in severe injury or death. It may also result in damage to the vehi- cle. Be sure to follow the instructions in this section. ●...

  • Page 171

    ● Never attempt to jump-start a frozen battery. It could explode and cause seri- ous injury. SCE0667 1. Prepare vehicle Ⓐ with the booster battery for 4. Switch off all unnecessary electrical systems the vehicle Ⓑ being jump-started. (headlights, hazard lights, etc.). 5.

  • Page 172

    8. Connect the jump leads in the sequence (① 13. Install the ventilator caps (if equipped). PUSH STARTING ② ) as illustrated. 14. Close the hood. CAUTION: CAUTION: ● Always connect positive to positive and negative to body ground (for ●...

  • Page 173

    Have your vehicle inspected or repaired by section. with, or get caught in, the cooling fan or a NISSAN dealer. drive belts. 10. Visually check if the cooling fan is running. If the engine of your vehicle is overheating (indi- cated by the engine coolant temperature gauge) 11.

  • Page 174

    To assure proper lorry as illustrated. towing and to prevent accidental damage to your vehicle, NISSAN recommends that you have a When towing with the front wheels on the service operator tow your vehicle. It is advisable...

  • Page 175

    , this may cause serious and ex- FOUR-WHEEL DRIVE (4WD) MODELS pensive damage to the transmission. If it is NISSAN recommends that towing dollies be used necessary to tow the vehicle with the front when towing your vehicle or that the vehicle be wheels raised, always use towing dollies placed on a flat bed lorry as illustrated.

  • Page 176

    FREEING TRAPPED VEHICLE CAUTION: WARNING: ● Make sure to set the 4WD mode switch ● Never allow anyone to stand near the to 2WD and move the gear lever into the towing line during the pulling operation. N (Neutral) position if the vehicle is to be towed.

  • Page 177

    CAUTION: In order to not break the towing line, tension it slowly. 6-16 In case of emergency...

  • Page 178: Appearance And Care

    7 Appearance and care Cleaning exterior................. Cleaning glass..............Washing................Plastic parts................Removing spots..............Seat belts................Waxing................... Corrosion protection..............Cleaning glass..............Most common factors contributing to vehicle Underbody................Corrosion................7-4 Cleaning alloy wheels............7-3 Environmental factors influence the rate of Chrome parts............... Corrosion................

  • Page 179

    1. Wash the vehicle surface with a wet sponge A NISSAN dealer can assist you in choosing the ● Be sure that the drain holes in the lower edge and plenty of water.

  • Page 180

    Before the winter period and again in the spring, CLEANING INTERIOR Occasionally remove loose dust from the interior the under seal must be checked and, if necessary, CAUTION: trim, plastic parts and seats using a vacuum clean- retreated. ● Wash your vehicle thoroughly and com- er or soft bristled brush.

  • Page 181

    FLOOR MATS PLASTIC PARTS MOST COMMON FACTORS CONTRIBUTING The use of NISSAN floor mats can extend the life Plastic parts can be cleaned with a mild soap TO VEHICLE CORROSION of your vehicle carpet and make it easier to clean solution.

  • Page 182

    Always check for minor damage to the paint which may be required in some areas, surface and if any exists, repair it as soon as- consult a NISSAN dealer. possible. ● Keep the drain holes in the lower edge of the doors open to avoid water accumulation.

  • Page 183: Maintenance And Do-it-yourself

    8 Maintenance and do-it-yourself Maintenance requirements............Brakes.................... 8-16 Scheduled maintenance............ Checking parking brake............. 8-16 General maintenance............Checking foot brake pedal..........8-16 Where to go for service............. Brake pad wear indicators..........8-17 General maintenance..............Brake booster..............8-17 Explanation of general maintenance items......Brake and clutch fluid..............

  • Page 184

    Interior lights................. 8-32 Tire wear and damage............8-34 Wheels and tires................. 8-32 Tire age..................8-34 Tire inflation pressure............8-32 Changing tires and wheels............8-35 Types of tires................ 8-32 Four-Wheel Drive (4WD) model..........8-35 SNOW chains..............8-33 Wheel balance................8-35 Tire rotation................8-34 Care of wheels................

  • Page 185

    However, some day-to-day and regular mainte- check for the cause or have a NISSAN dealer do it nance is essential to maintain your NISSAN’s good promptly. In addition, you should notify a NISSAN These checks or inspections can be done by your- mechanical condition, as well as its emission and dealer if repairs are required.

  • Page 186

    Lights*: Replace the TPMS transmitter grommet seal, Check the parking brake operation regularly. valve core and cap when the tires are replaced Check that the lever (if equipped) or the pedal (if Clean the headlights on a regular basis. Make sure due to wear or age.

  • Page 187

    filter and fuel lines should be Check under the vehicle for fuel, oil, water or other wait until it cools down. serviced by a NISSAN dealer because the fluid leaks after the vehicle has been parked for a fuel lines are under high pressure even while.

  • Page 188

    YD25DDTi ENGINE MODEL (LHD model) coverage. If in doubt about any servicing, 1. Window washer fluid reservoir 8. Engine coolant reservoir have it done by your NISSAN dealer. 2. Fuse/fusible link holder 9. Battery 3. Engine oil dipstick 10. Power steering fluid reservoir 4.

  • Page 189

    SSI0443 Right-hand drive (RHD) model (with engine cover YD25DDTi ENGINE MODEL (RHD model) 1. Window washer fluid reservoir 8. Engine coolant reservoir 2. Fuse/fusible link holder 9. Battery 3. Engine oil dipstick 10. Power steering fluid reservoir 4. Fuel filter 11.

  • Page 190

    ENGINE COOLING SYSTEM WARNING: ● Never remove the radiator cap or the engine coolant reservoir cap (models with heater) when the engine is hot. Serious burns could be caused by high pressure fluid escaping either from the radiator or the engine coolant reservoir cap.

  • Page 191

    ● When adding or replacing coolant, be sure to use only Genuine NISSAN Engine Coolant or equivalent in its quality with proper mixture ratio. Examples of the mixture ratio of coolant and water are shown in the following chart: Outside tem...

  • Page 192

    NISSAN Service Manual. caps are interchanged, overheating may oc- cur. ● NISSAN recommends that engine cool- ant change should be left to a NISSAN dealer. ● Improper servicing or engine coolant change can result in reduced heater performance (if equipped) and engine NDI614 overheating.

  • Page 193

    NISSAN recommends contacting a engine oil filler cap and pour the recommend- able floor jack and safety jack stands. Place NISSAN dealer for engine oil servicing. ed oil through the opening. Do not overfill the safety jack stands under the vehicle jack- Used oil must not be poured into the ground, canals, rivers, etc.

  • Page 194: Technical Information

    Engine oil and filter in this section. If necessary, add engine oil. 12. Install the engine oil filler cap ① securely. 1. Place a large drain pan under the drain plug 13. Start the engine. ②. 14. Check for any leakage around the drain plug 2.

  • Page 195

    ②. proper facilities. We recommend hav- 14. Check for any leakage around the drain plug. ing the engine oil changed by a NISSAN Correct as required. 6. Open the hood. For details, see “HOOD” in dealer.

  • Page 196

    filter wrench by turning it counterclockwise. Then 3. Start the engine and check for leakage changed by a NISSAN dealer. remove the oil filter by turning it by hand. around the oil filter. Correct as required.

  • Page 197

    Fuel filter ● Drained water is mixed with fuel and take precautions to prevent the fuel YD25DDTi engine (Euro 4) YD25DDTi engine (Euro 5) from adhering to rubber parts such as engine mounting insulator. 4. After draining, close the drain plug manually. CAUTION: ●...

  • Page 198

    BLEEDING FUEL SYSTEM Sedimentor (if equipped) YD25DDTi engine (Euro 5) YD25DDTi engine (Euro 4) SDI2194 DI1416-D JVM0259X If your vehicle is equipped with a separate Bleed air out of the fuel system after refilling an Bleed the air out of the fuel system after refilling sedimentor, perform the following procedures to empty fuel tank by the following action: an empty fuel tank by the following procedure:...

  • Page 199

    From the released position, pull the parking brake lever up slowly and firmly. If the number of clicks is WARNING: out of the range listed, see a NISSAN dealer. Power steering fluid is poisonous and should 8 to 9 clicks...

  • Page 200

    Ⓐ between the upper surface of the pedal checked as soon as possible by a NISSAN dealer. and the metal floor. If it is out the range listed, Proper brake inspection intervals should be checked as indicated in a separate Warranty see a NISSAN dealer.

  • Page 201

    NISSAN. CAUTION: ● NISSAN recommends that refilling and checking the brake and clutch systems should be left to a NISSAN dealer who will have the necessary fluids and tech- nical knowledge. SDI2147 ● Do not spill the fluid on painted surfac- es.

  • Page 202

    BATTERY SDI1573 8-19 Maintenance and do-it-yourself...

  • Page 203

    Do not overfill. ● If battery replacement or check is required, line ① . If the side of the battery is not clear, contact a NISSAN dealer. check the electrolyte water level by looking NOTE: directly above the cell, as illustrated.

  • Page 204

    4. Operate the buttons to check its operation. ● An improperly disposed battery can harm the environment. Always confirm See a NISSAN dealer if you need assistance local regulations for battery disposal. for replacement. FCC Notice: This device complies with Part 15 of the FCC Rules.

  • Page 205

    4. Operate the buttons to check its operation. adjusted by a NISSAN dealer. See a NISSAN dealer if you need assistance for replacement. 2. Have the belts checked regularly for condi-...

  • Page 206

    If the air clean- maintenance schedule shown in a separate er filter is not installed and the engine maintenance booklet. backfires, you could be burned. If replacement is required, contact a NISSAN ● Do not drive without the air cleaner filter. dealer. ●...

  • Page 207

    To remove the air cleaner filter: VISCOUS PAPER TYPE in a washer solution or a mild detergent. Rinse the 1. Disconnect the electrical connector ① . The filter element should not be cleaned and blade with water. If your windshield is still not clear reused.

  • Page 208

    Replacing 1. Lift the wiper arm away from the windshield. 2. Push and hold the release tab Ⓐ , and then move the wiper blade down ① the wiper arm to remove. 3. Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place.

  • Page 209

    3. Locate and remove the fuse using the fuse installing, have the electrical system checked puller (if equipped in the fuse box) . and repaired by a NISSAN dealer. NDI691 Right-hand drive (RHD) model 8-26 Maintenance and do-it-yourself...

  • Page 210

    Ⓑ . 7. Close the hood. NOTE: If the new fuse opens again, after install- ing, have the electrical system checked and repaired by a NISSAN dealer. NDI625 ENGINE COMPARTMENT CAUTION: Never use a fuse of higher or lower amper- age rating than that specified on the fuse...

  • Page 211

    1. Headlight 2. Personal light (if equipped) 3. Side turn signal light 4. Front fog light (if equipped) 5. Rear combination light 6. Number plate light 7. Interior light (if equipped) 8. High-mounted stop light (if equipped) NDI800 Clearance light NDI707 REMOVE INSTALL...

  • Page 212

    SDI2144 SDI2145 Number plate light Front turn signal light SDI1313 Room light (rear passenger compartment, if equipped) JVM0270X High-mounted stop light 8-29 Maintenance and do-it-yourself...

  • Page 213

    Wattage: 35 ways have your xenon headlights replaced at Bulb no.: D2R a NISSAN dealer. Halogen Wattage: 60 If replacement is required, contact a NISSAN Bulb no.: H4 dealer. ● Aiming is usually not necessary after Replacing halogen headlight bulb replacing the bulb.

  • Page 214

    8. Reconnect the negative (-) battery cable and close the hood. NOTE: ● Contact a NISSAN dealer, if you need assistance for bulb replacement. ● When there are rapid changes in tem- perature, some misting may occur on the inside of the lens.

  • Page 215

    Number plate ligh The tire pressure should be checked when tires are COLD. Tires are considered COLD after the *1: If replacement is required, contact a NISSAN vehicle has been parked for three or more hours, dealer. or driven less than 1.6 km (1 mile) . COLD tire *2: When there are rapid changes in tempera- pressures are shown on the tire placard affixed...

  • Page 216

    All season tires snow tires, on wet or dry surfaces, may be Driving with chains in such condition NISSAN specifies all season tires on some mod- poorer than that of non-studded snow tires. mechanisms of the vehicle due to some els to provide good performance for use all year overstress.

  • Page 217

    NDI762 MDI0004A TIRE WEAR AND DAMAGE TIRE ROTATION NISSAN recommends that tires be rotated every Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. 10,000km (6,000 miles) for Two-Wheel Drive If excessive wear, cracks, bulging or deep cuts (2WD) vehicles and 5,000 km (3,000 miles) for are found, the tire should be replaced.

  • Page 218

    NISSAN dealer or If the wheels are changed for any reason, always with the wheels off the vehicle. Spin balancing qualified workshop. Report all accidents where replace with wheels which have the same offset the front wheels on the vehicle could lead to the tire is knocked even if it is minor.

  • Page 219

    Vehicle identification ..............9-10 Radio approval number and information ....... 9-13 Vehicle identification plate ........... 9-10 For Indonesia Remote keyless entry system....9-13 Vehicle identification number (VIN) plate NISSAN Anti-Theft System (NATS) immobilizer.....9-13 (if equipped) ................9-11...

  • Page 220

    JASO DH-1 (*1) ACEA B1, B3, B4, or B5 (*1) with oil filter 4.8 L (4-1/4qt) Genuine NISSAN engine oil, API grade SL ,SM or SN (*1) QR25DE ILSAC grade GF-3, GF-4 or GF-5 (*1) without oil filter 4.5 L...

  • Page 221

    *3 : Never use API CG-4. *4 : If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using automatic transmission fluid other than Genu- ine NISSAN Matic S ATF or Matic J ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the warranty.

  • Page 222

    ● Above -7ºC (20ºF) . . . Summer type diesel fuel. ● Below -7ºC (20ºF) . . . Winter type diesel fuel. If you are in any doubt, please consult a NISSAN STI0697 dealer. RECOMMENDED SAE VISCOSITY CAUTION: NUMBER ●...

  • Page 223

    The release of refrigerant into the atmosphere is not recommended. The new refrigerant HFC 134a (R-134a) in your NISSAN vehicle will not harm the earth’s ozone layer. However it may contribute in a small part to global warming. NISSAN recommends that the refrigerant be STI0387B recovered and recycled.

  • Page 224

    The maximum vehicle speed, listed above, is the measured speed under certain testing conditions. The actual value may differ according to the vehicle usage and road and environmental conditions. NISSAN recommends you to ALWAYS observe posted speed limits and never drive too fast for conditions.

  • Page 225: Wheels And Tires

    WHEELS AND TIRES Unit: mm (in) Item Size Offset Steel 1565-1/2J 50 (1.97) Road wheel 1666J 55 (2.17) Aluminium 1667J 45 (1.77) 195R15C 205R16C Conventional Tire size 255/70R16 Spare Conventional Technical information...

  • Page 226

    DIMENSIONS Unit: mm (in) MODEL Double Cab Vehicle type 4 W D Tire size 195/R15C 205/R16C 255/70R16 5,125 (201.8)*1 Overall length 5,230 (205.9)*2 Overall width 1,795 (70.7) 1,850 (72.8) 1,795 (70.7) 1,850 (72.8) 1,710 (67.3)*3 1,730 (68.1)*3 Overall height 1,745 (68.7) 1,765 (69.5) 1,780 (70.1) 1,725 (67.9)

  • Page 227

    MODEL Single Cab Vehicle type 4 W D Tire size 195/R15C 205/R16C 5,140 (202.4)*1 4,790 (188.6)*1 5,140 (202.4)*1 Overall length 5,255 (206.9)*2 4,905 (193.1)*2 5,255 (206.9)*2 Overall width 1,795 (70.7) Overall height 1,700 (66.9) 1,705 (67.1) 1,740 (68.5) Front tread width 1,560 (61.4) 1,550 (61.0) Rear tread width...

  • Page 228

    VEHICLE IDENTIFICATION REGISTERING IN ANOTHER COUNTRY When planning to travel in another country, NISSAN is not responsible for any incon- you should first find out if the fuel available is suit- venience when the vehicle is taken and able for your vehicle’s engine.

  • Page 229

    STI0529 STI0431 NTI135 YD25DDTi engine VEHICLE IDENTIFICATION NUMBER VEHICLE IDENTIFICATION NUMBER (VIN) (chassis number) (VIN) PLATE (if equipped) The vehicle identification number plate is attached The number is stamped as shown. as shown. STI0549 QR25DE engine ENGINE SERIAL NUMBER The number is stamped on the engine as shown. 9-11 Technical information...

  • Page 230: Uniform Tire Quality Grading

    UNIFORM TIRE QUALITY GRADING (if equipped) Quality Grades: All passenger car tires must conform to local safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maxi- mum section width. For example: Treadwear 200 Traction AA Temperature A TREADWEAR The treadwear grade is a comparative rating based...

  • Page 231

    INFORMATION cornering, hydroplaning, or peak traction characteristics. For Indonesia NISSAN Anti-Theft System (NATS) immobilizer TEMPERATURE A, B AND C Remote keyless entry system The temperature grades are A (the highest) , B, and C, representing the tire’s resistance to the...

  • Page 232

    MEMO 9-14 Technical information...

  • Page 233: Index

    10 Index Brake system ..........5-34 Cleaning exterior ..........Brakes ............. . 8-16 Cleaning glass ..........7-3, 7-4 Air cleaner filter ........... 8-23 Checking brake pedal ........8-16 Clock adjustment......4-11, 4-17 , 4-22 Air conditioner ............ . Checking parking brake ......

  • Page 234

    Driving in winter conditions ......4WD mode switch operation ......5-20 Getting tools and spare wheel ......4WD warning light ..........5-22 Glove box ............. 2-26 Driving vehicle ..........5-10 Flat tire ..............Driving with Automatic Transmission ....

  • Page 235

    Locking with key ..........Operating precautions ......5-29, 5-31 NISSAN Anti-Theft System (NATS) key . .. Opeating tips ............Maintenance Remote keyless entry system ..... Outside rearview mirrors ........3-12 Explanation of general maintenance items Overheat Using remote keyless entry system .

  • Page 236

    Jump seat ............Sun visors ............. 2-28 Pre-tensioner seat belt system ....1-27 Sunglasses holder ..........2-27 Radio Precautions on seat belt usage ....Supplemental air bag systems ......1-26 CD player/LW-MW-FM radio type..... 4-21 Seat belt maintenance .

  • Page 237

    Tire wear and damage ........8-34 Utili-Track channenl system....... 3-16 Wiper Types of tires ..........8-32 Windshield wiper and washer switch ..2-21 Uniform tire quality grading ......9-12 Windshield wiper blades ......8-24 Wheels and tires ........8-32, 9-7 Vanity mirror .

  • Page 238

    ● In case of emergency ... 6-2 ● With Diesel Particulate Filter (DPF): (Flat tire, engine will not start, overheating, Gasoline engine Genuine NISSAN engine oil ACEA C3 or C4 towing) LOW ASH HTHS3.5, viscosity SAE 5W-30 ● How to start the engine ... 5-2 CAUTION: ●...

  • Page 239

    MEMO 10-7...

  • Page 240

    MEMO 10-8...

This manual also for:

Navara d40

Comments to this Manuals

Symbols: 0
Latest comments:
  • ابو محمد الربيعي May 24, 2016 04:08:
    مرحبا اود الحصو​ل على منول سرفس صيانة موديل​ات نيسان الحدي​ث للحاج​ه الماس​ه لها فكيف السبي​ل مع جزيل شكري