For Windows Users - Brother DCP-J752DW Quick Setup Manual

For Wireless Network Users
One-push setup using
11
WPS or AOSS™
Macintosh and mobile devices)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
c
Press .
Press WPS/AOSS.
When Enable WLAN? is displayed, press Yes
to accept.
This will start the wireless setup wizard.
To cancel, press No.
NOTE
If your wireless access point/router supports
WPS, you can also configure your machine using
the PIN (Personal Identification Number) Method.
uuSoftware and Network User's Guide
d
When the Touchscreen instructs you to start
WPS or AOSS™, press the WPS or AOSS™
button on your wireless access point/router (for
more information, see the instructions provided
with your wireless access point/router), and
then press OK on your machine.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
Wireless setup is now complete.
The Wi-Fi LED
lights up, indicating that the machine's
Network I/F is set to WLAN.
®
(Windows ,
on the control panel
NOTE
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows
mobile device's application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User's Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
http://solutions.brother.com/ and click Manuals
on your model's page.
To install MFL-Pro Suite, continue to
step 12.
®
For Windows users:
Now go to
Page 16
For Macintosh users:
Now go to
Page 18
®
Phone) from your
15