Hardwire - Bosch 300 Series Installation Manual

Installation Option #1: Hardwire
Hardwire Electrical
supply conductors shall be
a minimum #14 AWG
copper wire
rated at 167°F or higher
The dishwasher is designed for an electrical supply of 120V, 60 Hz, AC, connected to a dishwasher-dedicated,
Home Appliances - For Internal Use Only - Do Not Distribute
4
Internal use only| PDC-RNA/MK | March 2013| © Robert Bosch Hausgeräte GmbH, Munich reserves all rights even in the event of industrial
property rights. We reserve all rights of disposal such as copying and passing on to third parties..
Connect wires to junction box
terminal block and securely
the terminal block screws
properly grounded electrical circuit with a fuse or breaker rated for 15 amps.
tighten
Plug the end of the power cord
into the back of the dishwasher as
shown
until it clicks