RUGGEDCOM RS8000
Installation Guide
Figure 7: Failsafe Alarm Relay Wiring
1. Normally Open
2. Common
Section 2.4
Grounding the Device
The RS8000 chassis ground terminal uses a #6-32 screw. It is recommended to terminate the ground connection
with a #6 ring lug and torque it to 1.7 N·m (15 lbf·in).
Figure 8: Chassis Ground Connection
1. Stainless Steel Stud
Section 2.5
Connecting to the Device
The following describes the various methods for accessing the ROS console and Web interfaces on the device.
For more detailed instructions, refer to the ROS User Guide for the RS8000.
Serial Console Port
Connect a PC or terminal directly to the serial console port to access the boot-time control and ROS console
interface.
Grounding the Device
3. Normally Closed
2. #6-32 Screw
3. #6 Ring Lug
1
2
3
2
3
1
Chapter 2
Installing the Device
11