Return Plus Function And Return Function - JVC LT-Z26SX4B Instructions Manual

• The BLUE BACK function does not
work when the "Multi-picture"
function is being used.
• The ZOOM function does not work
when the "Multi-picture" function is
being used.
To return the "Multi-picture" to one
screen:
Press the X button, press the 5
buttons to choose one screen, and then
press the a button.
• Pressing the 4 button will
also return the display to one screen.
RETURN PLUS function and
Return function
The 1 button has two functions;
the RETURN PLUS function and the Return
function. If a channel has been registered as
the "Return Channel", the RETURN PLUS
function operates. If there is no setting for the
"Return Channel", the Return function
operates.
RETURN PLUS
By registering a channel you frequently view
as the "Return Channel", you can select that
channel at any time simply by pressing the
1 button.
To register a TV channel as the
"Return Channel":
Choose the Programme number to which the
channel you want to register has been set,
and press the 1 button and hold
for more than 3 seconds continuously.
"RETURN PLUS PROGRAMMED!" is
displayed and the registration is completed.
To cancel a TV channel registered as
the "Return Channel":
While viewing any TV channel, press the
1 button and hold for more than 3
seconds continuously. "RETURN PLUS
CANCELED!" is displayed and the
registration is cancelled.
• When you turn off the TV, the registration
for the "Return Channel" is cancelled.
Remote control buttons and functions
• If you want to view the "Return Channel"
and another TV channel alternately, first
choose a channel other than the "Return
Channel". And then press the
1 button to change the
channel to the "Return Channel" In this
way, you can view two channels
alternately by pressing the 1
button.
Return function
The TV temporarily memorises the TV
channel that was chosen right before the
current TV channel as the "Last Channel".
By pressing the 1 button, you can
alternately view the current TV channel and
the "Last Channel".
If you want to view two channels alternately
by using the Return function, first choose one
TV channel and then choose the other TV
channel with the number buttons. If you
choose the TV channel without using the
number buttons, there are cases where a
channel other than the one you first chose is
registered as the "Last Channel".
17