Troubleshooting - Philips OR2000M User Manual

Mini radio
Hide thumbs Also See for OR2000M:
Table of Contents

Advertisement

8 Troubleshooting

Warning
Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
product, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact the
Consumer Care, make sure that the product
is nearby and the model number and serial
number are available.
No power
Make sure that the AC power cord is
properly connected.
Make sure that there is power at the AC
power outlet.
No sound
Adjust the volume.
When listening to an external device, make
sure that the external device is not muted.
When listening to radio, make sure that
the audio input cable is disconnected from
the AUDIO-IN socket on the back of this
product.
No response from the product
Make sure that the power is available.
Power off the product, and then power on
again.
Poor radio reception
Due to the interference from other
electrics or building obstacles, the signals
become weak. Move the product to a
place free of interference.
Make sure that the antenna is fully
extended. Adjust the position of the
antenna.
EN
9

Advertisement

Table of Contents
loading

Table of Contents